Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This unit can record TV program to HDD only. If you try to record TV program in DVD mode, the unit automatically change the mode to HDD then start Note: recording. Timeshift HDD Do not miss a scene from a live broadcast. If the telephone rings while you are watching your favorite live broadcast, just press “TIMESHIFT” and “PAUSE” before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing. After the phone call or viewing interruption, press “PLAY” or “SCAN” to watch the program. Press “STOP” to return to the live broadcast. Timeshift (Pause, Live TV/Playback) Operation HDD You can store a program in the HDD storage cache temporarily. Press TIMESHIFT while watching a TV program. The Progress Bar display appears on the screen as shown below. The Progress Bar changes to timeshift icon after 5 seconds. 1 2 34 5 1. Indicates playback mode. 2. Indicates current Timeshift position. 3. Indicates Timeshift start time. 4. Indicates Timeshift elapsed time. 5. Indicates the time that is one hour from Timeshift start time. Tips: • You can use trick play functions (Slow, Scan, etc.) during timeshift. Refer to Playback Operation on pages 24-27. • You can edit the cached clip during Timeshift to retain the program on the HDD. Refer to Clip Record on the right. Notes: • If there is no free space on the HDD, the oldest timeshift section of the cache will be incrementally deleted. • If no button is pressed for 6 hours, the Timeshift will stop automatically. • If the TimeShift option in the Setup menu is set to [ON], the unit will starts this function automatically without pressing the TIMESHIFT button. Marker Search in Timeshift mode You can mark one in Timeshift mode. Press MARKER at the desired point during Timeshift. Press SEARCH to recall the marked scene. Clip Record HDD You can edit during Timeshift to store the program on the HDD (Hard Disk Drive). 1. During Timeshift, use pause step, search and slow-motion to find the starting point. 2. Press REC at the starting point of the section you want to record. Progress of the edit is indicated in red on the Progress Bar. 3. Use pause step, search and slow-motion to find the ending point. 4. Press REC at the ending point of the section you want to stop recording. Normal playback continues. 5. Repeat steps 1 and 4 to make several Clip Records of a program. 6. Press STOP to stop Timeshift. Confirm message will appear. 7. Use b / B to select [Yes] then press ENTER. Or, press STOP again. The current broadcast is displayed on the screen. Notes: • Selected sections are recorded on the HDD. • If you want to stop Clip recording, press the STOP button. If you press POWER to stop Clip recording, the program may not be recorded on the HDD. • Clip records cannot be made for sections lasting less than 5 seconds. • MPEG4 recording is not available with Clip Recording. (available only in MPEG2 recording format) Jump to Start or End during Timeshift 1. Press ENTER during timeshift. The menu will appear. 2. Press b and playback starts from the very beginning of the timeshift. Press B and jumps to the very end of the timeshift then goes to pause mode. To Exit the Timeshift 1. Press STOP to exit Timeshift function. Confirm message will appear. 2. Use b / B to select [Yes] then press ENTER. The current broadcast is displayed on the screen. 36 HDD To Pause the Recording Basic Recording from a TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. 1. Set a recording mode as necessary by pressing REC MODE repeatedly. (XP, SP, LP, EP or MLP) 2. Use PR/CH (+/-) buttons to select the TV channel to record. Changing TV Audio Channel You can select the audio channel (language) to listen by pressing AUDIO during viewing TV program. The current audio channel is displayed on-screen. Stereo broadcast: Stereo > Left > Right > Mono Bilingual broadcast: Main > Sub > Main+Sub • For TV recording with bilingual, set audio channel from the [TV Rec Audio] in sub-menu of the Setup menu (see page 21). • If the sound is of poor quality when set to Stereo, you can often improve it by changing to Mono (Left or Right). • This recorder can record either NICAM or regular audio. If the NICAM setting (page 17) is set to Auto, then if the broadcast is NICAM, the audio automatically changes to NICAM and you can record the NICAM audio. If the broadcast is non- NICAM, the regular audio is always recorded. If NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the program. 3. Press REC (z) once. Recording will start. (The REC indicator lights in the display window.) • Recording continues until you press STOP (x) or the HDD is full. • To record for a fixed length of time, see Instant Timer Recording on right. 4. Press STOP (x) to stop recording. 37 Recording 1. Press PAUSE/STEP (X) to pause recording. 2. When you want to continue recording, ...