Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH) . Select Bitstream when using the Digital Audio Output. AUDIO SETUPAUDIO SETUP MPEG-2 Digital Out : PCM DTS : Off Dynamic Compression : On PCM Down Sampling : On Multi Channel Output : Digital Dolby Digital Out : PCM Speaker Setup NOTE • Be sure to select the correct Digital Output or no audio will be heard. MPEG-2 Digital Out • When Multi Channel Output select Digital. 1. PCM : Dolby & MPEG-2 Digital Out works. Converts to PCM(2CH) audio. DTS Select PCM when using the Analog 1. Off : Doesn’t output digital signal. Audio Outputs. 2. On : Outputs DTS Bitstream via digital output only. 2. Bitstream : Select DTS when connecting to a DTS Decoder. Converts to MPEG-2 Digital Dynamic Compression Bitstream (5.1CH or 7.1CH). 1. On : To select dynamic compression. Select Bitstream when using the 2. Off : To select the standard range. Digital Audio Output. PCM Down Sampling 1. On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ. 2. Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes. Multi Channel Output ( DVD-E435 only) 1. Digital : Select this when using the multichannel digital audio output. 2. Analog : Select this when using the multichannel analog audio output. Speaker Setup ( DVD-E435 only) NOTE • How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button. • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. 44 Surround 2 2 1 With the unit in Stop mode, Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. Select Audio Setup using UP/DOWN buttons, 3 then press the RIGHT or ENTER button. Select Multi Channel Output using UP/DOWN4 buttons. Then select Analog pressing the RIGHT or ENTER button. Use the UP/DOWN buttons to select Speaker Setup. 5 Then press the RIGHT or ENTER button. Use the UP/DOWN or LEFT/RIGHT buttons to select6 the desired item. Then press the ENTER button. The default settings : FRONT L, R (Large), CENTER (None), SURROUND (None) Select the size of the speakers to be connected. • Front (FL, FR) - Large: Normally select this. - Small: When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer. • Center - None: If you do not connect a center speaker, select this. CHANGINGSETUP MENU AUDIO SETUPAUDIO SETUP MPEG-2 Digital Out : PCM DTS : Off Dynamic Compression : On PCM Down Sampling : On Dolby Digital Out : PCM Speaker Setup Multi Channel Output : Analog AUDIO SETUPAUDIO SETUP MPEG-2 Digital Out : PCM DTS : Off Dynamic Compression : On PCM Down Sampling : On Dolby Digital Out : PCM Speaker Setup Multi Channel Output : Analog - Large: Normally select this. - Small: When the sound cracks, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers. • Surround (SL, SR) - None: If you do not connect a center speaker, select this. - Large (Rear/Side): Normally select either of these according to the rear speaker’s position. - Small (Rear/Side): When the sound cracks or the surround sound effects are difficult to hear, select either of these according to the rear speaker’s position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers. Setting up TEST The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system. FRONT(L) CENTER SUBWOOFER PHILIPS Corporation. SURROUND(R) SURROUND(L) FRONT(R) NOTE • How to make the SETUP menu disappear or return to menu screen during set up. Press RETURN or LEFT button. • The subwoofer test output signal is lower than the other speakers. • The MPEG Multichannel logo is a trademark registered by ENGENG Setting Setting Setting 1 1 DISPLADISPLAY SETUPSETUP Still Mode : Auto Screen Massages : On Front Display : Auto Dim Black Level : Off NTSC Disc Output : PAL 60 Hz SCART Output : RGB TV Aspect : 4:3 L-Box TVTV ASPECTASPECT 4:3 Pan Scan 16:9 Wide 4:3 Letter Box TV Aspect With the unit in Stop mode, Depending on the type of setting (aspect ratio). 2 2 Select Setup using UP/DOWN buttons, 1. 4:3 Letter Box : then RIGHT or ENTER button. Select when you want to see the total though you have a TV with a 4:3 ratio screen. Black bars Select Display Setup using UP/DOWN buttons, and bottom of the screen. 3 then press the RIGHT or ENTER button. 2. 4:...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVD-E232 (1.38 mb)
DVD-проигрыватели - DVD-E234 (1.38 mb)