Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Status Bar Displays the current playing status. This display appears when the DISPLAY button is pressed repeatedly during playback. The numbers in parentheses indicate reference pages. Chapter number of the DVD or the index number of the VIDEO Playback status CD or CD (67). (BPlayback, XPause, DVD T41 – 8 T 0:08:41 Type of disc being played back. Title number of the DVD or the xStop, etc.). Playing time or remaining time (41). track number of the VIDEO CD or CD (67). (DVD playback only) DOLBY DIGITAL 3/2.1 Format of the current audio signal (44). Lights up in green during Shuffle Play (35). Unit being repeated. Lights up in green during Programme Play (35). CHAPTER Lights up in green during Repeat Play (37). Example of when Repeat Play is selected. The display will differ when A-B Repeat Play is set. Control Bar The Control Bar appears when a playback function is selected by pressing the function’s button on the remote. Playback function icon. Lights up in green Example of when 2(7)when a playback (angle) is pressed function is selected. on the remote. Selected item or unit. Control Menu The Control Menu appears when the DISPLAY button is pressed when the player is in stop mode. The number in parenthesis indicate reference pages. SETUP (56) • Select QUICK to make the minimum number of basic adjustments to use the player. • Select CUSTOM to make a full range of adjustments. Lights up in green during Programme Play. QUICK CUSTOM PARENTAL CONTROL (49) • Set this to limit the playback of selected discs. • Select RESET to return the adjustments to the default settings. PROGRAM (35) • Allows you to play titles, chapters or tracks in any order you want. Getting Started Getting Started Quick Overview A quick overview presented in this chapter will give you enough information to start using the player for your enjoyment. To use the surround sound features of this player, refer to “Hookups” on page 17. Note You cannot connect this player to a TV that does not have either a SCART (EURO AV) or video input jack. Be sure to turn off the power of each component before connecting. Step 1: Unpacking Check that you have the following items: • Audio/video cord (pinplug . 3 y pinplug . 3) (1) • Remote commander (remote) RMT-D126P (1) • R6 (size AA) batteries (2) Step 2: Inserting Batteries into the Remote You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the player. Notes • Do not leave the remote in an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. • If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Step 3: TV Hookups Connect a SCART (EURO AV) cord (not supplied) and the mains lead in the order (1~3) shown below. Be sure to connect the mains lead last. PCM/DTS/MPEG/ DOLBY DIGITAL R-AUDIO-L VIDEO COAXIAL LINE (RGB)-TV LINE OUT S VIDEO OUT DIGITAL OUT LINE (RGB)-TV 3 Power source 1 SCART (EURO AV) cord (not supplied) CD/DVD Player TV 2 Power source l: Signal flow to SCART (EURO AV) input to T LINE (RGB)-TV When connecting to a standard 4:3 screen TV Depending on the disc, the image may not fit your TV screen. If you want to change the aspect ratio, please refer to page 58. If your TV does not have a SCART (EURO AV) connection Refer to B in “Step 1: Connecting the Video Cords” (page 17). Getting Started Step 4: Playing a Disc 1 Turn on the TV. 2 Switch the input selector on the TV to the player. With the playback side facing down 3 Press POWER on the player. 4 Press A on the player to open the disc tray. 5 Place the disc on the tray with the playback side facing down. 6 Press H. The disc tray closes and the player begins playing the disc. After Step 6 Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want from the menu and play the DVD (page 33) or VIDEO CD disc (page 34). To stop playing Press x. To take out the disc Press A. To turn off the player Press ^/1 on the remote. The player is set to standby mode and the power indicator lights up in red. Press POWER on the player to turn off completely. Hookups Hooking Up the Player Follow Steps 1 to 4 to hook up and adjust the settings of the player. Before you start, turn off the power, check that you have all of the supplied accessories, and insert the batteries into the remote (page 14). Notes • Plug cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. Hookups Step 1: Connecting the Video Cords Connect your CD/DVD player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of...