Оценок - 0, средний балл: 4
(
)
)
|
Фрагмент инструкции
Helpful Hints • The remaining recording time will appear on the display panel during an OTR. Press DISPLAY to see it on the TV screen. •To change the recording length while an OTR is in progress, press REC I repeatedly. •You cannot pause an OTR. • If the preset time for a timer recording comes up during an OTR, the OTR has priority. The timer recording will not take place. • If the end of the tape is reached during an OTR, the VCR will stop recording, eject the tape, and switch to DVD mode or turn off. • If one or more Timer recordings are on standby when one OTR ends, the DVD/VCR will turn off automatically and “ ” will appear on the DVD/VCR’s display panel indicating that it is now ready for another timer recording. E8A21UD_EN1 5/29/06 3:13 PM Page 27 Rerecording (Tape Duplication) 27 These instructions show you how to copy videotapes. The illustration uses two DVD/VCRs. Other VCRs or Camcorders may operate differently. 1. Audio cable from AUDIO OUT jacks (red and white) of DVD/VCR 1 to AUDIO IN jacks of DVD/VCR 2 DIGITAL AUDIO OUT COAXIAL AUDIO OUT DVD L R L R L R S-VIDEO OUT COMPONENT VIDEO OUT CB / PB AUDIO OUT DVD/VCR VCR ANT -IN ANT-OUT VIDEO OUT AUDIO IN VIDEO IN CR / PR DIGITAL AUDIO OUT COAXIAL AUDIO OUT DVD L R R L S-VIDEO OUT COMPONENT VIDEO OUT Y CB / PB DVD/VCR VCR ANT -IN ANT-OUT VIDEO OUT AUDIO IN VIDEO IN CR / PR DVD/VCR 1 Playing unit 3. RF coaxial cable from the ANT-OUT (Antenna Out) jack of DVD/VCR 2 to the TV’s ANTENNA IN jack 2. Video cable from yellow VIDEO OUT jack of DVD/VCR 1 to VIDEO IN jack of DVD/VCR 2 DVD/VCR 2 Recording unit 1 1 Make the connections shown above. 2 2 DVD/VCR 1 will play your tape. Put a prerecorded tape into the cassette compartment of DVD/VCR 1. Press VCR to put the unit in VCR mode if necessary. 3 3 DVD/VCR 2 will record your tape. Insert a blank tape in the cassette compartment of DVD/VCR 2. Press VCR to put the unit in VCR mode if necessary. 4 4 Turn on the TV and set it to channel 03 or 04 (the RF output channel of DVD/VCR 2). To determine the DVD/VCR’s output channel, see step 4 on page 9. 5 5 Point the remote control at DVD/VCR 2. Press Number buttons 0, 0, 1 or 0,0,2. (See Helpful Hints to the right.) 6 6 Press REC MODE to select SP or SLP at DVD/VCR 2. 7 7 Press PLAY B (VCR) on the front of DVD/VCR 1 and REC I on the front of DVD/VCR 2 at the same time. To stop recording, press STOP/EJECT C A on DVD/VCR 2, then press STOP/EJECT C A on DVD/VCR 1. •If you use the AUDIO and VIDEO IN jacks on the back of DVD/VCR 2, press Number buttons 0, 0, 1 at step 5. L1 will appear on the TV screen. •If you use the AUDIO and VIDEO IN jacks on the front of DVD/VCR 2, press Number buttons 0, 0, 2 at step 5. L2 will appear on the TV screen. • Unauthorized recording of copyrighted television programs, video tapes or other materials may infringe on the rights of copyright owners and violate copyright laws. • If a program has copyright protection, it may not be recorded clearly. Helpful Hints English E8A21UD_EN1 5/29/06 3:13 PM Page 28 28 Timer Recording English Follow the steps below to program the VCR of the DVD/VCR to record TV programs while you’re away from home. Before you begin: . Set up the TV channels at the DVD/VCR. Details are on page 21. . Set the clock. Details are on page 22. . Put a tape in the cassette compartment of the DVD/VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s). . Press VCR so VCR light appears on the front of the DVD/VCR. 1 1 1 Press DISC/VCR MENU so MENU1 appears. 2-8 2 2 Press K or L to select TIMER PROGRAMMING. Then, press B. Program numbers that do not have a timer recording stored will flash. 3 3 Press K or L to select an empty program. Then, press B. PROGRAM NUMBER 1 DATE – – / – – START TIME – – : – – – – END TIME – – : – – – – CHANNEL – – REC SPEED – – 4 4 Press K or L to select ONCE, DAILY or WEEKLY. Then, press B. . ONCE - The VCR will record a TV program on any day you choose, up to 12 months away. . DAILY - The VCR will record a TV program at the same time on the same channel every day, Monday through Friday. . WEEKLY - The VCR will record a TV program at the same time on the same channel every week, for example, every Monday. 5 5 To enter the recording date, press K or L until the month appears. Then, press B. Next, press K or L until the day appears. Then, press B. The day of the week will appear. You cannot record more than one year in advance. 6 6 To enter the recording’s start time, press K or L until the hour appears. Press B.Press K or L until the minute appears. Press B.Finally, press K or L to point to AM or PM. AM or PM will flash beside the start time. Press B. 7 7 Repeat the procedure in step 6 to set the recording’s end time. 8 8 Press K or L until the channel number appears. Then, press B. . If you are using a standard antenna/Cable TV hookup (as shown on page 9), select the channel of the TV program you want to record. •You cannot access the TIMER PROGRAMMING menu at st...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVP3200V/37 (3.03 mb)