Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Details about tape speed are on page 67. 4 4 Press CH + or CH -or the Number buttons to select the TV channel to record. 5 5 Press REC I to start recording. “REC” will appear on the DVD/VCR’s display panel. 6 6 To pause the recording, press PAUSE k once. “REC” will flash. To resume recording, press REC I or press PAUSE k again. “REC” will reappear. 7 7 To stop recording, press STOP C. Recording Prevention Video cassettes have record tabs to ensure that recordings are not accidentally erased. 1 1 To prevent recording, break off the tab with a screwdriver. 2 2 To allow recording, cover the hole with clear tape. Cover the tab to prevent Remove the hole to allow recording. recording. 1Turn on the TV. 2 2 Insert a tape in the DVD/VCR. DISPLAY TIMER SET BACK PLAY REW FFW PREV NEXTPAUSE REC STOP OK REPEAT REPEAT A-B CH + - CLEAR REC MODE SEARCH MODE TITLE 6 4 5-6 7 4 3 • Other recording options are on pages 25-30. • The VCR will record in a preset volume. • Pause will switch to Stop after 5 minutes to protect the VCR and the tape from damage. When a recording is paused, review the pause time remaining with the ¦ marks on the screen. Each ¦ mark equals 1 minute remaining. During the last minute of paused recording, the ¦ mark will flash. • If any menu is on the TV screen, REC I on the remote does not function. Press CLEAR to remove the menu. Then, press REC I.Or, use REC I on the front of the DVD/VCR. Helpful Hints E8A21UD_EN1 5/29/06 3:13 PM Page 25 Recording One Channel/Watching Another 25 1 1 Press VCR. Insert a recordable tape, then press 1 REC I to record the current TV channel. Details are on page 24. 2 2 Press TV/VIDEO once to put the DVD/VCR in TV 2,5 position. The VCR light will disappear from the DVD/VCR’s display panel. 3 3 Use the TV remote control to select the channel you want to watch at the TV. 4 4 To return to the channel being recorded, use the TV remote control to return to channel 03 or 04 at the TV. Details are on page 9. Or, if you connected the DVD/VCR to the TV using audio and video cables, return to the TV’s correct Video In channel. Details are on page 12. 1 6 5 5 Press TV/VIDEO on the DVD/VCR remote control to put the DVD/VCR in VCR position. (The VCR light will appear in the DVD/VCR’s display panel again.) The channel being recorded will appear on the TV screen. 6 6 Press STOP C to stop the recording. Select the channel you want to watch at the TV. Reselect channel 03, 04 or Video In at the TV. TV/VIDEO VCR DVD VCR Plus+ SUBTITLE AUDIO ANGLE ZOOM DVD SETUPMENU DISC/VCR DISPLAY TIMER SET BACK PLAY REW FFW PREV NEXTPAUSE REC STOP OK REPEAT REPEAT A-B CH + - CLEAR REC MODE SEARCH MODE TITLE 3 4 Helpful Hint • If you use a Cable Box or Satellite Receiver, you may not be able to watch one channel while recording another. See pages 10-11 for details. English E8A21UD_EN1 5/29/06 3:13 PM Page 26 26 One-Touch Recording English One-Touch Recording (OTR) lets you set a timed recording 30 minutes to 8 hours long of the current TV channel. Before you begin: . Place the DVD/VCR in VCR mode. Press VCR so VCR light 1 appears on the front of the DVD/VCR. . Select a recording speed (SP, SLP) by pressing REC MODE. . Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s). 1 1 Press VCR,then press CH + or CH - or the Number buttons to select the channel you want to record. 2 2 Press REC I repeatedly until the desired recording length (30 minutes to 8 hours) appears on the TV screen. Recording will begin.“REC” and “ ” will appear on the DVD/VCR’s display panel. 2 OTR (0:30) 1 SP When an OTR ends TV/VIDEO VCR DVD VCR Plus+ SUBTITLE AUDIO ANGLE ZOOM DVD SETUPMENU DISC/VCR DISPLAY TIMER SET BACK PLAY REW FFW PREV NEXTPAUSE REC STOP OK REPEAT REPEAT A-B CH + - CLEAR The DVD/VCR will turn off and “ VD/VCR’s display panel will flash indicating that the r ding is complete, then goes into the timer standby mode again. witch to DVD mode automatically.) At this point, you cannot use the VCR unless you release the DVD/VCR from the timer standby mode. To release the DVD/VCR from timer standby mode . If the DVD component is active and no more timer recordings are on standby, you can cancel the timer standby mode by pressing TIMER SET or VCR on the remote control or by pressing SOURCE or STOP/EJECT on the front panel. . If the DVD component is not activ , ” is not flashing but lit indicating there are more timer recordings on standby, you can cancel the timer standby mode only by pressing TIMER SET on the remote control or by pressing STOP/EJECT C A on the front panel. . After releasing the DVD/VCR from timer standby mode, you can use it as usual. Stopping an OTR To stop an OTR before recording is finished, press STOP C on the remote control or STOP/EJECT CA on the front of the DVD/VCR. To cancel the OTR but continue recording, press REC I repeatedly until REC appears in the upper left corner of the TV screen, and “ ” disappears. Helpful H...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVP3200V/37B (3.03 mb)