Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Philips, модель DVP 3055V

Производитель: Philips
Размер: 901.79 kb
Название файла: da1329ac-c456-d964-8514-741a3433b686.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


If the picture is clean, press 1 11 on the DVD+VCR to finish. 5 5 Press CHANNEL 3 or 4 on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area. Note The RF channel will not change until step 6 has been executed. 6 6 Press 1 11 to store the new RF video channel into the DVD+VCR memory. Now tune your TV set to the new DVD+VCR RF channel. Note If the TV picture was clear in step 4, do not retune your TV. Using your DVD+VCR for the very first time For the following steps we assume that you have just connected your DVD+VCR for the very first time. To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels in your DVD+VCR. 1 1 Make sure that you have correctly installed your DVD+VCR. Press 1 11 to turn on your DVD+VCR. If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned. OK iPr-12 ACMS ACMS 2 2 Press OK to start the automatic tuning process. 01 C02 00 02 C03 00 03 C04 00 ES iPr-12 ACMS 3 3 Press SYSTEM MENU to remove the menus from the TV screen. 12 Before Operation -VCR part Setting the clock Manually The clock in your DVD+VCR controls time and date settings for your DVD+VCR. 1 1 Press SYSTEM MENU. Press b or B to select SET. Press OK. HH MM DD MM YY : . .--- - - - -- 12 SET 2 2 Use 3 or 4 on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The day of the week will appear automatically when you enter the year. HH MM DD MM YY : . .00 1 01 05 SAT 12 SET 8 3 3 If you make a mistake press b bb or B BB and enter the correct details. 4 4 Press SYSTEM MENU. To set the colour system 4 4 3 3 2 2 1 1 Press SYSTEM MENU. The main menu will appear on the TV screen. Press 1 or 2 to select the SYS and press OK. Press 3 or 4 to select according to the COLOUR system used. REC Pr-12 ACMS SYS SYS ON OFF f NIC DECODERAUD AUTO PAL SECAM MESECAM 5 5 Press 2 to select the RF AUDIO. Press 3 or 4 to select according to the RF AUDIO used. ON OFF OSDfREC i Pr-12 ACMS SYS SYS NIC DECODERAUD RF -I/I RF - B/G RF - D/K 6 6 Press SYSTEM MENU to remove the menus from the TV screen. English 13 Before Operation -VCR part English How to using the main menu This VCR can easily be programmed by using the menus displayed on screen. The menus are controlled from the Remote Control Handset. 1 1 Switch on your TV set and video recorder by pressing the 1 11 button. 2 2 Press SYSTEM MENU button. The main menu will appear on the TV screen. REC REC OK i SYSPSETRPr-12 ACMS ON OFF OSDf12 SET NIC DECODERAUD REC -Timer recording setting (see p. 23). PR SET - Manual tuning setting (see p. 15). ACMS -ACMS (Automatic Channel Memory System) (see p. 14). SET - Date & clock setting (see p. 13). SYSTEM -To set the Colour TV System (see p. 13). RF AUDIO -To select the channel of audio output according to your TV type (“I/I” for PAL I/I TV,“B/G” for PAL B/G TV,“D/K” for PAL D/K TV) (see p. 13). Dr. -To check a problem with your VCR (see p. 31). AUDIO -To select the channel for audio output (see p. 32). F.OSD ON/OFF -To display the operational mode of your VCR (see p. 31). 16:9/4:3 -To select the aspect ratio of your TV (see p. 32). DECODER -To use a pay-TV decoder (or Satellite) with your VCR (see p. 32). OPR -To improve the playback picture (see p. 21). NIC -To activate or deactivate the NICAM digital sound (see p. 32). Tip You can change the menu language on the DVD setup menu. (See the Menu Language on page 18.) 3 3 Press 1 and 2 to select the desired menu. Press OK and use 3 or 4 to select. 4 4 Press SYSTEM MENU to return to a TV picture. Tuning in TV Stations Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly.To overcome this problem please turn to the MANUAL TUNING section on page 15. 1 1 Press 1 11 to turn on your VCR. 2 2 Press SYSTEM MENU button. The main menu will appear on the TV screen. Press 1 or 2 to select the ACMS. Press OK. OKPr-12 ACMS ACMS REC SYS ON OFF OSDfPSETR12 SETACMS Pr-12 ACMS Pr-12 OK NIC DECODERAUD 3 3 Press OK again to start the automatic tuning process. 01 C02 00 02 C03 00 03 C04 00 ES Pr-12 ACMS 4 4 The TV STATION TABLE will appear when tuning is complete. Press SYSTEM MENU to save your settings. 02 C03 00 03 C04 00 04 C05 00 05 C06 00 06 C07 00 07 C08 00 08 C09 00 01 C02 00 OK,DELETE : MOVE : PSETR 14 Before Operation - VCR part Tuning in TV Stations Manually In certain areas of the country broadcast signals may be too weak for your VCR’s automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your VCR to store them. 1 1 Press SYSTEM MENU. The mai...

Эта инструкция также подходит к моделям:
DVD-проигрыватели - DVP3055V/02 (901.76 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории