Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
If your videocassette has the safety tab removed and you set the MOVIE RETURN function to ON during initial setup, the VCR will stop and automatically rewind the videocassette, eject it, and turn off the power when it reaches the end of the tape or a blank section of tape which lasts for more than 30 seconds. This function works only in PLAYBACK mode, not in RECORDING mode. Special Playback Effects Part of the fun of video watching is being able to stop the action and take a closer look or repeat a favorite scene. You can view the tape in variety of modes selected from the remote control. 1You can see some noise or interference during these Special Playback. This is normal. Still Playback (Pause) Press PAUSE to still the tape during play. The picture will "freeze". After 5 minutes in PAUSE mode, the VCR automatically switches to STOP mode to protect the tape. If the screen jitters during PAUSE, use the remote's TRACKING buttons to minimize it. (See manual Tracking) To resume play, press PAUSE or PLAY again. Basic Operations Frame Advance While in PAUSE mode during playback, press F.ADV to view the video one frame at a time. Press PAUSE to resume play. Skip Playback While playing back your tape you can skip forward by pressing the F.ADV button. The tape will search ahead for about a minute and then resume playing. Slow Motion To slow the playback speed to exactly the pace you want, press PLAY, VCR1 or VCR2 on respective mode, then press one of the VOLUME/SLOW buttons. Press VOLUME/SLOW ( ) to slow down, press VOLUME/SLOW ( ) to speed up. The more times you press, the slower or faster the slow motion. If you want to minimize noise in slow motion playback, first set the VCR in still playback and press VCR 1, then press either of the TRACKING buttons ( or ) to minimize vertical shaking. Then set the VCR in slow playback and press VCR1 or VCR2, then press TRACKING buttons to minimize visual noise bands on the screen in EP mode. But noise in SP mode can not be minimized by tracking. After 5 minutes in slow motion playback, the VCR will stop the tape automatically to prevent damage to the tape and the VCR. To return to playback at a normal speed, press PLAY. To stop the tape, press STOP. 2You may see intermittently appearance of blue back screen. To Find Specific Sections on a Tape Visual Search This function lets you search backward and forward through the videotape while viewing it. Using the remote control or buttons on the VCR: • Press PLAY and REW to search in reverse. • Press PLAY and then F.FWD to search ahead. • Press PLAY again to return to to normal playback. 3The playback picture will have noise in the visual search mode. This is normal. Searching with the Time Counter During playback (and recording), a counter keeps track of how many hours, minutes, and seconds the tape has run. When you first start playback, the counter shows briefly in the TV screen's upper right corner. When you want to check the counter during playback, there are several ways to do it. Basic Operations Pressing DISPLAY will cycle you through the three options. • Press DISPLAY just once to see the counter, mode, time, and date on the screen for 5 seconds. • Before the 5 seconds are up, press DISPLAY a second time to see just the counter. It will stay on the screen. • Press DISPLAY a third time to see the counter on the VCR display as well. ("M" will display below the counter on the TV screen.) • Press DISPLAY a fourth time to end the on-screen display. The linear time counter operates only if there is something recorded on the tape. The counter changes to 0:00:00 when the tape is ejected. Marking with the Time Counter If there is one part of the video that you want to return to, you can set the time counter to memorize that spot. Begin in either STOP or PLAY mode. • Press DISPLAY twice to show the counter on the TV screen. Begin recording or playing back a tape. Notice the counter remains on the screen. • At the point that you want to go back to, press CLEAR on the remote control. This resets the counter to 0:00:00. Press STOP when you are done recording or playing back the tape. • Press DISPLAY again and "M" will display below the counter on the TV screen: This indicates that the counter's memory function is engaged. The counter also appears on the VCR's display. Now when you rewind the tape, it will automatically stop at the spot where you cleared the counter. (Notice it moves just past the marker and then back to it.) Press PLAY to watch the tape from that preselected spot. • Press DISPLAY to take the counter display off. The spot is still in memory until you set a new one or until the tape is ejected. Jump Forward or Backward with INDEX Using the time counter, you can search for a spot a certain number of minutes before or after your current position on the tape. Press STOP, if tape is playing, and press INDEX to bring up the Set Go-To Time Screen: SET GO-TO TIME TIME -:-- INDEX PRESS F.FWD OR REWIND TO START SCAN AND PLAY *TO...
Эта инструкция также подходит к моделям:DVD-проигрыватели - VT-M270A (777.37 kb)