Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Each is a high speed, low cost CD Recordable duplication system from Microboards Technology, LLC. The QD-MultiDrive is perfect for any user requiring easy copying of audio, video, or Data CDs. Superior technology allows the QD-MultiDrive to ship without a hard drive. LED indicators provide the user with status of the duplication process, minimizing the number of faulty discs. Current high speed CD Recordable technology is supported at 52X, which is the highest in the industry. Applications suited for the QD-2 include Pro Audio, Multimedia, Government / Education, Software Development, Medical Imaging, and Data Interchange. Unpacking your system When unpacking your duplicator, confirm the following items are included: • QD-MultiDrive duplicator • Power cable • Manual • CD-R disc If any of these items are missing, please contact Microboards Technology Technical Support. IMPORTANT: Please keep all the packing for your QD-MultiDrive duplicator. If your unit ever needs to be sent in for service, it must be returned in the original packing or the warranty will be voided. Installation • Connect the power cable to the QD-MultiDrive duplicator and plug in to a protected power outlet strip or UPS power supply. Note for Installation: 1) The socket outlet shall be installed near the equipment and be easily accessible. 2) Do not block cooling fans. • Turn on power to the duplicator. • The system will go through initialization and then display: 1. Copy. • The system is now ready to use. Basic Instructions Buttons and LCD There are four buttons and an LCD on the front panel of the QD-MultiDrive duplicator. LED display: Shows the menu items and any status messages that may come up during operation ENT button: The ENT button, used to start a duplication process or enter into an area in the menu structure. ESC button: The ESC button, used to stop an operation or move up the menu structure. ^ button, used to scroll up in the different menus. Ў button, used to scroll down in the different menus. 5 Hardware Description Controller Interface Reader Drive Recorder Drives Power Switch Power LED QD-123 The QD-MultiDrive system consists of a CD reader, 3, 5, or 7 CD recorders (based on model) and Controller module. The master discs always go into the TOP CD Reader drive. The blank CD media will always go into the CD Recorder drives below the Reader. The power switch and power LED are also located on the front of the QD-MultiDrive duplicator. The LCD display will show the different menu selections and also information pertaining to the recording process. Here is a typical example of what is displayed during the COPY process: Displays the function being performed, Shows the percentage such as Copying or Testing, and shows completed for this action. the record speed. Copying – 52x 17% 150.4 MB 01:15 Displays the amount of data left to be recorded. This number starts at the capacity of the master and counts down. Shows the time remaining to complete this action. This number also counts down. 6 Main Menu 1.0 Copy 2.0 Test 3.0 Test & Copy 4.0 Verify 5.0 Compare 6.0 Prescan 7.0 Disc Info 8.0 Edit Track Source Disc Analyzing…. Copying – 52x 17% 150.4MB 01:15 1.0 Copy OK: 07 ESC Load Next Blank Disc ENT Source Disc Analyzing…. Testing –52x 17% 150.4MB 01:15 2.0 Test OK: 07 ESC Load Next Blank Disc ENT Source Disc Analyzing…. Copying – 52x 17% 150.4MB 01:15 3.0 Copy OK: 07 ESC Load Next Blank Disc ENT Preparing…... Copied disc is now being read. 4.0 Verify OK: 07 Preparing….. Compare OK: 7 Fail: 0 Diff: 0 Copied disc is now being compared with the master disc. Source Disc Analyzing…. Scaning 24x 15% 620.4MB 01:15 PreScan OK ESC ESC ESC Ў Ў Ў Ў Ў Ў Ў Ў ENT ENT ENT ENT ENT ENT Source Disc Analyzing…. Total 01 Sessions Total 01 Tracks. Total: 04:15 Total: 37.0 MB Session 01 Track01 -01. Track 01 CDXA 37.1 MB ENT ЎЎЎЎ 8-01. Edit Track CD to CD Edit 8-02. Edit Track Play Audio Track 8-03. Edit Track Close Session Select Track: 1/10 05:14 Select Track: +10/10 05:14 ENT orЎ ENT = Select that track number Ў= Skip that track number Select Track: End 3 Trk 13:36 Ў End Edit disc And burn? YES NO Copying – 52x Edit 3/10 ? 2/3 Burn Complete! OK: 01 Continue edit Next Disc? NO ESC Insert Next Master Close all disc’s Session? YES YES NO Closing Sesion Please wait….. Close Complete OK: 7 Fail: 0 ENT ESC Select Track: 1/16 02:45 Playing Track – 1 00:15 / 02:45 Close all Disc’s Sessions? YES Closing Session Please wait…... ENT ENT Close Complete OK: 7 Fail: 0 YES ENT ENT YES ESC ENT ESC ESC ESC Ў Ў NOTE: This feature is not available on all models. The reader drive must have a headphone jack for this feature to operate. NO 9. Setup See the Setup Menu (page 12) Press and Hold the ESC button for3 seconds 10. Adv Setup See the Adv. Setup Menu (page 15) 7 Functions There are 9 different functions for the QD-MultiDrive duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track and Setup. For the Setup options, please refer to page 12. These...
Эта инструкция также подходит к моделям:DVD-проигрыватели - QD-127 (248.19 kb)
DVD-проигрыватели - QD-MultiDrive (248.19 kb)
DVD-проигрыватели - QD-123 (248.19 kb)