Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
Advanced Features: • Stand-Alone DVD-+R/RW/DL / CD-R duplicator • One Touch duplication • Auto Run option • Speed selectable (1x to 16x for DVD-+R and 4x to 48x for CD-R) • Supports writing to DVD-+R/RW/DL, CD-R/RW • Copy and Verify • Counter feature allows the user to input how many discs need to be copied and the keeps track of the total discs completed. • Automatically detects DVD or CD masters • Simulation mode to ensure recording stability • Easy-to-read, two-line display for status and error reporting • Updates easily installed through DVD/CD reader Unpacking your system When unpacking your duplicator, confirm the following items are included: • DVD Premium Series duplicator • Power cable • Starter Kit (includes User’s Manual and Warranty information) If any of these items are missing, please contact or Microboards Technology Technical Support at 952-556-1639. IMPORTANT: Please keep all the packing for your DVD Premium Series duplicator. If your unit ever needs to be sent in for service, it must be returned in the original packing or the warranty will be voided. Microboards Statement Regarding Improper Duplication Microboards Technology fully supports the right of any business, organization, group, or individual to protect their property from unlicensed, unauthorized, or illegal duplication. As a user of our equipment, we expect you to support that right as well. Microboards Technology is neither responsible nor liable for the infringement of any laws regarding the illegal duplication of property. Microboards Technology products are in no way intended to encourage or condone such duplication. 5 DVD Premium Series MICROBOARDS TECHNOLOGY, LLC Installation Requirements System Setup • Connect the power cable to the DVD Premium Series tower and plug in to a protected power outlet strip or UPS power supply. • Turn on power to the tower. The system is now ready to use. Install your DVD Premium Series duplicator in the following environment: • On a level and stable surface • In a well ventilated location • Temperature and humidity • Temperature: 5-40° • Humidity: 20-80%RH (no dew formation) Do not install it in the following places: • Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked by a curtain or blind.) • A dusty location • A place where there is a lot of vibration • Near open flame • A place where the temperature and humidity change drastically • Near a heating device such as a heater or furnace • A location where air from an air conditioner blows directly onto the unit • Near a container filled with water such as a vase In winter during times of low humidity or in a location where static electricity is generated, use an anti-static-electricity mat or humidifier to prevent static electricity. Power supply • Use house current as the power source for the unit. • Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying machine). • Use an outlet with stable power supply voltages. • Do not overload an outlet. Do not use a service outlet from a PCs or other office machine. • Wire the power cord properly. • Do not touch the power cord with a wet hand. • Be careful not to damage the power cord. Inspect the power cord periodically. In the event that the power cord is damaged, replace the power cord. Be sure to use a tool such as the screwdriver to change the 115/230V Switch. Do not use your finger. 6 DVD Premium Series MICROBOARDS TECHNOLOGY, LLC Main Menu The Arrow buttons (Ў^)allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item. NO/ESC (MODE CHANGE) SETUP? SETUP MENU (see pg 8) YES (DISCtoDISC) SIMULATION? MASTER DISC INSERT YES ESC SIMULATION 15:26 CD-DA 20%TARGET DISC INSERT ANALYZING MASTER (REWRITABLE) DISC ERASE? NO,Ў NO,Ў ESC YES >QUICK ERASE? >QUICK ERASE? NO,Ў NO,Ў >EXIT? NO,Ў SURE ? DISC ERASE YES SURE ? DISC ERASE YES Please wait... Please wait... YES YES COPY 15:26 INSERT INSERT ANALYZING MASTER COPY START? NO,Ў YES CD-DA 20%MASTER DISC TARGET DISC (DISCtoDISC) Copy Disc to Disc 1. Place the Master Disc into the Reader drive. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master; you cannot copy a CD master to DVD’s, for instance. 2. The display reads COPY START? (DISC to DISC). Copy Start? (DISC to DISC) 3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when the master is loaded and all drives are loaded with blank media. 4. The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job. 5. The display will now show the progress of the Copy Job. COPY 4.0GB DVD 25% ...