Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The timer duration has elapsed A signal sounds. 00:00 is shown in the display. Use the 0 button to switch off the timer. Changing the timer duration Use the @or Abutton to change the timer duration. After a few seconds, the change is adopted. Cancelling the timer duration Use the Abutton to reset the timer duration to 00:00. The change will be adopted after a few seconds. The timer is switched off. Checking the time settings If several time-setting options are set, the relevant symbols are illuminated on the display. The symbol for the time-setting option that is visible in the display is shown in brackets. To call up the Utimer, rcooking time, pend time or 0 clock, press the 0button repeatedly until the brackets are around the relevant symbol. The display shows the value for a few seconds. Cooking time The cooking time for your dish can be set on the oven. When the cooking time has elapsed, the oven switches itself off automatically. This means that you do not have to interrupt other work to switch off the oven. The cooking time cannot be accidentally exceeded. Example in the picture: cooking time 45 minutes. 1. Use the function selector to set the type of heating. 2. Set the temperature or grill setting using the temperature selector. 3. Press the 0button twice. 00:00 is shown in the display. The time symbols light up and the brackets are around r. 4. Use the @or Abutton to set the cooking time. Default value for @button = 30 minutes Default value for Abutton = 10 minutes The oven will start up after a few seconds. The cooking time counts down in the display and the [r] symbol lights up. The other time symbols go out. The cooking time has elapsed A signal sounds. The oven stops heating. 00:00 is shown in the display. Press the 0button. You can set a new cooking time using the @or Abutton. Or press the 0button twice and turn the function selector to the off position. The oven switches off. Changing the cooking time Use the @or Abutton to change the cooking time. After a few seconds, the change is adopted. If the timer has been set, press the 0button beforehand. Cancelling the cooking time Use the Abutton to reset the cooking time to 00:00. After a few seconds, the change is adopted. The cooking time is cancelled. If the timer has been set, press the 0button beforehand. Checking the time settings If several time-setting options are set, the relevant symbols are illuminated on the display. The symbol for the time-setting option that is visible in the display is shown in brackets. To call up the Utimer, rcooking time, pend time or 0 clock, press the 0button repeatedly until the brackets are around the relevant symbol. The display shows the value for a few seconds. End time You can change the time at which you wish your dish to be ready. The oven starts automatically and finishes at the desired time. You can, for example, put your dish in the cooking compartment in the morning and set the cooking time so that it is ready at lunch time. Ensure that food is not left in the cooking compartment for too long as it may spoil. Example in the picture: it is 10:30 am, the cooking time is 45 minutes and the oven is required to finish cooking at 12:30 pm. 1. Adjust the function selector. 2. Set the temperature selector. 3. Press the 0button twice. 4. Use the @or Abutton to set the cooking time. 5. Press the 0button. The brackets are around p. The time when the dish will be ready is displayed. 6. Use the @or Abutton to set a later end time. After a few seconds, the oven adopts the settings and switches to standby position. The time at which the dish will be ready is shown in the display and the psymbol is in brackets. The Uand 0symbols go out. When the oven starts, you can see the cooking time counting down in the display and the rsymbol is in brackets. The psymbol goes out. The cooking time has elapsed A signal sounds. The oven stops heating. 00:00 is shown in the display. Press the 0button. You can set a new cooking time using the @or Abutton. Or press the 0button twice and turn the function selector to the off position. The oven switches off. Changing the end time Use the @or Abutton to change the end time. After a few seconds, the change is adopted. If the timer has been set, first press the 0button twice. Do not change the end time if the cooking time has already started to elapse. The cooking result would no longer be correct. Cancelling the end time Use the Abutton to reset the end time to the current time. After a few seconds, the change is adopted. The oven starts. If the timer has been set, first press the 0button twice. Checking the time settings If several time-setting options are set, the relevant symbols are illuminated on the display. The symbol for the time-setting option that is visible in the display is shown in brackets. To call up the Utimer, rcooking time, pend time or 0 clock, press the 0button repeatedly until the brackets are around the relevant symbol. The display shows the value for a few seconds...