Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
[RGB] When your TV is connected with the SCART jack. [YPBPR] When your TV is connected with the COMPONENT/ PROGRESSIVE SCAN jacks on the unit. If you change TV Output Select to RGB from YPbPr on the setup menu especially when connecting the unit in the way of component video connection, the screen turns black. In that case, connect the video cable to MONITOR jack and select YPbPr on the setup menu again. ,,Note Progressive Scan (For Component Video connections) Selects whether the COMPONENT VIDEO(PROGRESSIVE SCAN) OUTPUT jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off]. If you set Progressive Scan to [On] in error, you must reset the unit. First, remove the disc in the unit. Next, press and hold STOP (Z) for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. AUDIO DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surrounds decoder. 1. Press SETUP. 2. Use WS to select AUDIO menu and then press D. 3. Use WS to select [5.1 Speaker setup] menu and then press D. 4. Press ENTER The [5.1 Speaker setup] appears. 5. Use AD to select the desired speaker. 6. Adjust options using WSAD buttons. 7. Press RETURN to confirm your selection. Return to the previous menu. [Speaker] Select a speaker that you want to adjust. Certain speaker settings are prohibited by the Dolby Digital licensing agreement. ,,Note [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press AD to adjust the output level of the selected speaker. [Distance] After you connected speakers to your unit, set the Distance between the speakers and your listening point if the distance of Center or Rear speakers is bigger than the distance of Front speakers. This allows the sound from each speaker to reach the listener at the same time. Press AD to adjust the Distance of the selected speaker. This distance is equivalent to a difference of the distance between Center or Rear speaker and Front speakers. [Test] Press AD to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. LOCK (Parental Control) Initial Setting of the Area Code: When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press D. 2. Press D. To access the [Lock] options, you must input the password you have created. Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3. Select the first character using WS buttons. 4. Press ENTER and select the second character using WS buttons. 5. Press ENTER to confirm your Area code selection. Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select [Rating] on the [Lock] menu then press D. 2. Input a password and press ENTER. 3. Select a rating from 1 to 8 using the WS buttons. [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection. Password You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the menu. If you forget your password, you can clear it using the following steps: 1. Press SETUP to display the Setup menu. 2. Input the 6-digit number “210499” and press ENTER. The password is cleared. ,,Note Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 29. 1. Select [Area Code] on the [Lock] menu then press D. 2. Input a password and press ENTER. 3. Select the first character using WS buttons. 4. Press ENTER and select the second character using WS buttons. 5. Press ENTER to confirm your Area code selection. OTHERS DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod....