Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Save these instructions and review frequently prior to use and in instructing others. 1-800-544-6986 TV100 WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following. KEY INFORMATION YOU SHOULD KNOW: READ ALL INSTRUCTIONS GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS •Charge tool for 12 hours before first use. •Switch button must be depressed to operate tool in • KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. either direction • CONSIDER WORK AREA ENVIRONMENT. Keep work area well lit. Don’t use portable electric tools near flammable liquids or in explosive atmospheres. •If bit does not fit into spindle, rotate bit and re-insert. Motors in these tools spark, and might ignite fumes. • KEEP CHILDREN AWAY. All visitors should be kept away from work area. VEA EL ESPANOL EN LA CONTRAPORTADA. POUR LE FRANCAIS, VOIR LA COUVERTURE ARRIERE. • DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE • USE SAFETY GLASSES. GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL • DON’T OVERREACH. Keep proper footing and balance at all times. PRODUCTO. • MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safe performance. Keep handles dry, clean, and free from oil and grease. • LOCK OFF TOOLS when not in use, and before servicing. 1 SAVE THIS • STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place — out of reach of children. MANUAL FOR • DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was intended. FUTURE REFERENCE. • USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy duty tool. 386230/TV100 11/14/03 7:32 AM Page 2 1 2 Screw Vis Tornillo Anchor (drywall only) Ancrage (pour murs secs seulement) Anclaje (Solo paneles) 3/16" (4.7mm) Bit-Drywall; 3/32" (2.3mm) Bit-wood Lame pour murs secs de 4,7 mm (3/16 po); foret a bois de 2,3 mm (3/32 po) Pobroca para paneles 4.7mm (3/16"); Broca para madera 2.3mm (3/32") Bit Storage (up) Case de rangement des lames (en haut) Compartimiento para puntas (arriba) Wall Mur Pared Spindle Arbre FlechaCharger base Socle de chargement Base del cargador 3 2 386230/TV100 11/14/03 7:32 AM Page 3 E NGLISH •AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on the switch. Be sure the switch is off when charging. •STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired. CAUTION: When drilling or driving into walls, floors or wherever live electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by the plastic handle to prevent shock. SAVE THESE INSTRUCTIONS FOR FUTURE USE Charging Notes NOTE: The tool was sent from the factory in an uncharged condition. Before attempting to use it, it must be charged for 12 hours. 1. Charger will work best at normal room temperature. 2. The charger plug and the tool handle may become warm while charging. This is normal and does not indicate a problem. 3. The tool can be left on charge as long as you desire. A minimum charge time of 12 hours is required to recharge a completely discharged tool. 4. For most fix up jobs a charge of 3 to 4 hours will be adequate. MOUNTING Refer to Figure 1 for wall mounting instructions. Switch To turn the tool ON in a forward direction, (driving fasteners or drilling holes), slide the switch button to the right and align it with the arrow pointing forward. DEPRESS the SWITCH button and the tool will run. Release the switch button and the tool will stop. To operate in reverse (removing fasteners or backing out a jammed drill bit) slide the switch button to the left and align it with the arrow pointing backward. DEPRESS the SWITCH button and the tool will run. Release the button and the tool will stop. With the switch button in any of its 3 positions and NOT depressed, the tool will lock and act as any conventional, non-powered screwdriver. This feature is useful for giving an extra twist to screws to tighten them firmly or loosen extra tight ones. The RBRC™ Seal The RBRC™ Seal on the nickel-cadmium battery pack indicates that this product is voluntarily participating in an industry program to collect and recycle these battery packs at the end of their useful life, when taken out of service within the United States. The RBRC™ program provides a convenient alternative to placing spent nickel-cadmium battery packs into the trash or municipal waste stream which is illegal in some areas. The RBRC™program makes it easy for you...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - TV100 (133.8 kb)