Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
22. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use 3 of the power from those intended a hazardous situation. SERVICE 23. Have your power tool serviced a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SPECIFIC SAFETY RULES 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. 3. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. 4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. 5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paint • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically- treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles. Symbology Specifications Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current No Load Revolutions per Minute (RPM) Amperes Mexican Approvals Marking Cat. No. Volts AC Amps No Load RPM 0233-20 120 5.5 0-2800 0234-1 120 5.5 without RAD 0-850 RAD low 0-565 RAD high 0-1275 0234-6 120 5.5 without RAD 0-850 RAD low 0-565 RAD high 0-1275 0235-21 120 5.5 0-850 0235-6 120 5.5 0-850 0236-6 120 5.5 without RAD 0-850 RAD low 0-565 RAD high 0-1275 0244-1 120 5.5 without RAD 0-600 RAD low 0-400 RAD high 0-900 Right Angle Drive Unit Cat. No. 48-06-2871 FUNCTIONAL DESCRIPTION 1. Chuck 2. Nameplate 3. Trigger 4. Forward/Reverse switch 5. Side handle 5 1 2 4 3 Grounded Tools: Tools with Three Prong Plugs Tools marked “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet (See Figure A). If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. The grounding prong nected through the green cord to the grounding system The green wire in the cord must only wire connected to the tool's ing system and must never be attached an electrically “live” terminal. Your tool must be plugged into an appro-priate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in Figure A. Double Insulated Tools: Tools with Two Prong Plugs Tools marked “Double Insulated” do not re-quire grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Labo-ratories, Inc., the Canadian Standard As-sociation and the National Electrical Code. Double Insulated tools may be used in ei-ther of the 120 volt outlets shown in Figures B and C. Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the WARNING! grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, have it repaired by a MILWAUKEE service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDING Fig. B Fig. C Fig. A 4 5 EXTENSION Grounded tools require cord. Double insulated use either a two ...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - 0233-20 (266.12 kb)
Дрели и шуропопверты - 0234-1 (266.12 kb)
Дрели и шуропопверты - 0234-6 (266.12 kb)
Дрели и шуропопверты - 0235-21 (266.12 kb)