Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
740228-02 (APR83-CD) Printed in U.S.A. ► Black s Deo ken OWNER’S MANUAL Your Black & Decker Electric SCRUGUN® is a heavy-duty tool, capable of continuous production service on assembly operations«. For disassembly work, there is a reversing switch conveniently located on the handle back, opposite the trigger switch. A wide variety of y4” hex drive accessories—bits, sockets, nutsetters, extensions, etc., permit this tool to drive or remove many types of threaded fasteners. For personal safety and for proper operation of the Scrugun®, please take the time to carefully read all of the safety rules and instructions in this booklet. Don’t forget to send in the owner registration card. THANK YOU for buying BLACK & DECKER! . DOUBLE INSULATED -HEAVY-DUTY SCRUGUN® SCREWDRIVERS Cat. Nos. 2020-10 POSITIVE CLUTCH 2025-10 VERSA-CLUTCH® 2033-10 DRYWALL 2034-10 DRYWALL 2022-10 POSITIVE CLUTCH 2032-10 DRYWALL 2034-15 DRYWALL ACCESSORY ASSEMBLY & ADJUSTMENTS The 1/4" HEX DRIVE QUICK CHANGE CHUCK (Fig. 3) Is used on all positive and versa-clutch units. A ball retainer provides positive locking of all accessories In the chuck. Push forward on the bail retainer and hold while inserting or removing accessories. Release for positive accessory retention. DRYWALL UNITS (Fig. 4). The HEX DRIVE BALL LOCK CHUCK is used on ai! drywali screwdrivers. To change Bit Holders on Drywali Units 1. Unscrew collar AND locator assembly from gear case (left hand thread). NOTE: There is no need to unscrew locator from collar. 2. Pull bit -holder straight out with pliers, if it is difficult to remove. 3. Push new bit holder into spindle until ball lock snaps in groove In bit holder shank. 4. Replace collar and locator assembly. DEPTH ADJUSTMENT ON DRYWALL UNITS (Fig. 5) 1. Turn locator until end of bit extends 3/16" beyond end of locator. 2. Test drive a fastener In scrap material to determine if fastener is correctly seating. 3. Further adjustment may be necessary to increase or decrease the fastener depth. TO INCREASE, turn the locator so that end of bit extends further from end of locator. TO DECREASE, turn the locator so that end of bit is closer to end of locator. Black & Decker Drywali Units have very fine depth settings, each “detent” is .0052* or one revolution of the locator equals .083* change In depth setting. SCREWDRIVER ACCESSORIES continued Hex Drive Shank Extensions ”=F!fri SHANK SIZE SQ. DR. LENGTH 1/4** 1/4* 2* sckets—1/4* hex. 1/4** 1/4* 6* TYPE SOCKET SIZE DIAM. LENGTH 1/4* 1/2* 7/8* Non- 5/16* 1/2* 7/8* Magnetic 3/8* 9/16* ■ 15/16* 1/4* 7/16* 7/8* Magnetic 5/16* 1/2* 7/8* 3/8* 9/16“ 7/8* Sockets for the above : FOR DRIVING HEX NUTS AND SHEET METAL SCREWS 1/4* Sq. Drive SCREW TYPE AND NUMBER SIZE FLAT OR - OVAL . ROUND u FILLISTER u BINDING TT PAN U TRUSS 1/4" Hex Bits For Slotted Head Screws 3,4 3,4 4,5 3 4 2 5 5 6 4 5 3,4 6 6 8 5 6 — 8 8 10 6,8 8 5,6 10 10,12 " 12 10 10 8 12,14,1/4 14,16,1/4 1/4 12,1/4...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - Scrugun 2020-10 (3.45 mb)
Дрели и шуропопверты - Scrugun 2032-10 (3.45 mb)
Дрели и шуропопверты - Scrugun 2033-10 (3.45 mb)
Дрели и шуропопверты - Scrugun 2034-10 (3.45 mb)