Оценок - 3, средний балл: 4 ( )

Производитель: Sony Размер: 811.06 kb Название файла: Язык инструкции:

• Tapes recorded in the LP mode of other NTSC system VCRs can be played back on this VCR, but the picture quality cannot be guaranteed. • While setting the menu on the TV screen, you cannot use the H PLAY, X PAUSE, M FF, m REW or x STOP buttons. These buttons are used for menu operations. Basic Operations Basic Operations Recording TV programmes 1 2 3 4 5 6 7 8 9 0 INPUT SELECT PROG +/– DISPLAY REC SPEED z REC 1 Turn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 PROG Press PROG +/– to select the programme position you want to record. SP APC Basic Operations REC SPEED Press REC SPEED to select the tape speed, SP or LP. LP (Long Play) provides recording time twice as long as SP (Standard Play), however, SP produces better picture and audio quality. LP APC REC Press z REC to start recording. The recording indicator lights up red in the display window. LP APCRecording indicator To stop recording Press x STOP. To check the remaining tape length Press DISPLAY. The white bar indicates the approximate length of tape remaining. Basic Operations S E– 000 Remaining tape length Time counter To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. 2 Select another programme position on the TV. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape. Safety tab continued Basic Operations Recording TV programmes (continued) To record NTSC colour system programmes NTSC colour signals can be recorded on this VCR from the LINE-1 IN and LINE-2 IN (SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) jacks only. To select the line input, press INPUT SELECT or PROG +/– so that “L1” or “L2” (SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) appears in the display window. For tape speed, select SP or EP in step 4. EP (Extended Play) provides recording time three times as long as SP, however, SP produces better picture and sound quality. When playing a tape, the VCR automatically detects the tape speed. Tips • To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press the ?(ten’s digit) button followed by the programme number buttons. • You can select a video source from the LINE-1 IN or LINE-2 IN (SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) jacks. Press INPUT SELECT or PROG +/– to display “L1” or “L2” SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only) in the display window. • The display appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. • If you do not want to watch TV while recording, you can turn off the TV. • You can have the VCR stop automatically after starting at a specified time. For details, see “Setting the recording duration time” on page 40. Notes • The display does not appear during still (pause) mode or slow-motion playback. • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. • The remaining tape length does not appear while playing or recording in the NTSC system. Basic Operations Recording TV programmes using the Easy Timer function The Easy Timer function allows you to make a timer recording of a programme without turning on your TV. Set the recording timer to record only one programme that will be broadcast within the next 24 hours using the EASY TIMER knob. If the VCR clock has not been set, you can also set the clock before setting the timer recording. Setting the Easy Timer PROGRAM +/– Before you start… • Insert a tape with its safety tab in place. Make sure the tape is longer than the recording time. REC SPEED SP/LP (SP/EP) EASY TIMER knob 1 EASY TIMER Push the EASYETIMER knob. Basic Operations The START indicator appears in the display window. If the clock has not been set, “–:– –” appears. Go to step 2 in “Setting or changing the Easy Clock” on page 27. SP APC START 2 EASY TIMER Set the recording start time by turning the EASY TIMER knob clockwise or counterclockwise to increase or decrease the time by 15 minutes. To increase or decrease the time by one minute, press PROGRAM +/–. SP APC START EASY TIMER Push the EASYETIMER knob to confirm the start time setting. The STOP indicator appears. SP STOP APC continued Basic Operations Recording TV programmes using the Easy Timer function (continued) EASY TIMER 4 Set the recording stop time in the same way as in step 2, then push the EASY TIMER knob. A programme number flashes. SP APC 5 EASY TIMER Turn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to record. To select the tape speed, press REC SPEED. LP APC REC SPEED SP/LP (SP/EP) EASY TIMER 6 Push the EASY TIMER knob to confirm the settin...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: