PowerLitePowerLite Home Cinema 5010/5010e Home Theater Projector User’s Guide Contents Contents Projector Parts 6 Remote Control 8 Optional Accessories 9 Registration and Warranty 9 Using This Manual Setting Up the Projector 11 Choose a Location 11 Installing the Projector Connecting the Cables 17 Connecting Video and Computer Equipment 17 Making Other Connections 19 Installing Batteries in the Remote Control Turning the Projector On and Off 20 Turning On the Projector 20 Turning Off the Project

Adjust this setting first, then fine-tune the image with the remaining settings. The Brightness setting controls how much light is produced by the projector, and the Contrast setting adjusts the difference between the bright and dark areas of the projected image. The other settings listed on the following page control how the projector interprets the light and dark areas of the picture. Making Detailed Adjustments 35 ¦ Brightness/Contrast Picture • Input Adjustment • Brightness/Contrast Note: If

Color S-video Component Video HDMI PC Only RS-232c Trigger Out Composite Video Power Projection Lens F-number: 2.0 - 3.17, 22.5 - 47.2 mm focal length 16:9 widescreen image size (projected distance) 100" diagonal (wide: 9.8' - tele: 20.9') Lens Shift Vertical: 96.3% max (up and down) Horizontal: 47.1% (max. left and right) Fan Noise 22 dB - 31 dB Lamp 200 W UHE (Ultra High Efficiency) E-TORL Lamp Life** Up to 4000 hours Dimensions (W x D x H) 17.7" x 15.5" x 5.4" (excluding f

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Responsible Use This unit is equipped with Macrovision copy protection. The intellectual property rights to the patent of this copy protection technology are owned by the Macrovision Company of America, and others. When employing this technology, a licens

To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu settings: Open the Image menu . . . and select Reset You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps: 1. Press the Menu button on the remote control. 2. Open the Reset menu. 3. Do one of the following: ¦ Select Reset Lamp Hours to clear th

Then press the Ppower button on the projector or the On button on the remote control to turn it back on. Power light and power button are on Projection is in progress. Lights indicating a problem Light state Cause and solution All lights are off The projector is not receiving power. Make sure the power cord is connected securely at both ends. The temperature light flashes orange High-speed cooling is in progress. If the temperature rises further, projection will stop automatically. Make sure the

Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includin

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchas

Designed especially for home cinema use, it offers these outstanding features: ¦ Native 1080p (1920 . 1080) resolution, dynamic contrast ratio up to 40,000:1 and up to 2200 lumens of brightness (white light output) for incredibly rich, sharp images in any room lighting ¦ Auto Iris system that constantly controls the light output based on the gamma and black/white levels of your projected content, for perfectly adjusted images and deepest blacks ¦ Epson C2Fine® 3LCD technology for reliable pictur

After a moment, the image appears on the screen using the retrieved settings. Certain settings may not be applied, depending on the input signal. Renaming Memory Settings You can rename memory settings so that they are easier for you to recognize. 1. Press the Memory button on the remote control. 2. Select Rename Memory. 3. Select the memory name you want to change, then press the Enter button. The name selection screen is displayed. 4. Do one of the following: ¦ To select a name from the displa