Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Домашние кинотеатры - HT-DDW790 (280.97 kb)
Домашние кинотеатры - HT-DDW790 (2.14 mb)
Фрагмент инструкции
However, “UNLOCK” appears on the display if no digital signal is input through the OPTICAL jack. K COAX Function Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections. Lights up when a memory function, such as Name Input, Preset Memory (page 48), etc., is activated. Lights up when using the receiver to tune in radio stations (page 46), etc. Note “RDS” appears for models of area code CEL, CEK only. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 48. Lights up when dynamic range compression is activated (page 34). Lights up when DVD input is selected. However, “UNLOCK” appears on the display if no digital signal is input through the COAXIAL jack. continued 7 GB Getting Started Name Function L Playback The letters (L, C, R, etc.) channel indicate the channels being indicators played back. The boxes around the letters vary to show how the receiver downmixes the source sound. L Front Left R Front Right C Center (monaural) SL Surround Left SR Surround Right S Surround (monaural or the surround components obtained by Pro Logic processing) Example: Recording format (Front/ Surround): 3/2.1 Sound Field: A.F.D. AUTO [SW LFE [SQ di 8GB Rear panel 12 3 ANT NNA :d| tv 1 sat OPTCAL COAXIAL AUDO IN tUDO IN 4 A DIGITAL INPUT section □ OPTICAL IN jack Connects to a DVD player, etc. The COAXIAL jack provides a better quality of loud sound (page 19). © COAXIAL IN jack B ANTENNA section O FM ANTENNA jack Connects to the FM wire antenna supplied with this receiver (page 21). Ef- AM ANTENNA terminals Connects to the AM loop antenna supplied with this receiver (page 21). C AUDIO INPUT section AUDIO IN Connects to a CD White (L) jacks player, etc. (page 17). Red (R) D SPEAKER section i—i Connects to the speakers and sub woofer* (page 15) * The numbers of the SUB WOOFER terminals varies depending on the models. 9fifl Getting Started Remote commander You can use the supplied remote RM-AAU013 to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 53). RM-AAU013 Name Function A tv i/1 Press TV 1/1 and TV (O) at (on/standby) the same time to turn the TV on or off. AV 1/1 Press to turn on or off the (on/standby) Sony audio/video components that the remote is assigned to operate. If you press 1/1 (B) at the same time, it will turn off the receiver and other components (SYSTEM STANDBY). Note The function of the AV 1/1 switch changes automatically each time you press the input buttons (C). B 1/1 Press to turn the receiver on or (on/standby) off. To turn off all components, press 1/1 and AV 1/1 (A) at the same time (SYSTEM STANDBY). C Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can change the button assignments following the steps in “Changing button assignments” on page 53. Button Assigned Sony component VIDEO 1 VCR (VTR mode 3) VIDEO 2 VCR (VTR mode 2) VIDEO 3 Not assigned DVD DVD player SAT Satellite tuner TV Television SA-CD/CD Super Audio CD/CD player TUNER Built-in tuner 10GB Name Function D 2CH Press to select 2CH STEREO mode. A.F.D. Press to select A.F.D. mode. MOVIE, Press to select sound fields MUSIC (MOVIE, MUSIC). E AMP MENU Press to display the menu of the receiver. Then, use V, V, B, b and © to perform menu operations. F FM MODE Press to select FM monaural or stereo reception. G D.TUNING Press to enter direct tuning mode. D.SKIP Press to skip disc of the CD player or DVD player (multidisc changer only). H DVD MENU Press to display the menu of the DVD player on the TV screen. Then, use V, V, B, b and © to perform menu operations. I ENTER Press to enter the value after selecting a channel, disc or track using the numeric buttons of the TV, VCR or satellite tuner. MEMORY Press to store a station. J TOOLS Press to display options applicable to the entire disc (e.g. disc protection), recorder (e.g. audio settings during recording), or multiple items on a list menu (e.g. erasing multiple titles). Press TOOLS and TV (O) at the same time to display options applicable to the TV. K MUTING Press to activate muting function. Press MUTING and TV (O) at the same time to activate the TV’s muting function. L TV VOL Press TV VOL +/- and TV +*/- (O) at the same time to adjust the TV volume level. MASTER VOL Press to adjust the volume +*/- level of all speakers at the same time. Name Function M MENU Press to display the menus of the VCR, DVD player, Blu-ray disc player or satellite tuner on the TV screen. Press MENU and TV (O) at the same time to display the TV’s menu. Then, use V, V, B, b and © to perform menu operations. 0 ./> Press t...
Эта инструкция также подходит к моделям:Домашние кинотеатры - HT-DDW685 (727.59 kb)