Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment. Regulatory Information/disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no ENGLISH liability for any damage or violation of government regulations arising from failing to comply with these guidelines. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels. CE/EMC Restriction of Liability The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limitations. If the product is used in an uncertified PC, the manufacturer undertakes no warranty in respect to the EMC limits. The described product in this handbook was constructed, produced and certified so that the measured values are within EMC limitations. In practice and under special circumstances, it may be possible, that the product may be outside of the given limits if it is used in a PC that is not produced under EMC certification. It is also possible in certain cases and under special circumstances, which the given EMC peak values will become out of tolerance. In these cases, the user himself is responsible for compliance with the EMC limits. Declaration of Conformity This equipment has been tested and found to comply with Directive 1999/5/CE of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. After assessment, the equipment has been found to comply with the following standards: EN 300.328 (radio), EN 301 489-1, EN 301 489-17 (electromagnetic compatibility) and EN 60950 (safety). This equipment may be used in all European Union contries and ENGLISH in all countries applying Directive 1999/5/CE, without restriction, with the exception of the following countries: France: When this equipment is used outdoors, output power is limited to within the frequency bans listed on the chart. For more info, consult the website Location Frequency Band (MHz) Power (EIRP) Indoor (no restriction) 2400-2483,5 100mW(20dBm) Outdoor 2400-2454 2454-2483,5 100mW(20dBm) 10mW(10dBm) Italy: For more info, consult the website ENGLISH For more detailed instructions on configuring and using the NetServer Pro, please refer to the manual included in NetServer Pro CDRom. 1.1 Package contents Atlantis Land NetServer Pro, CDRom with manual and PS-Utility, Quick Start Guide, Power Adapter AC-DC (5V, 2.5A). 1.2 The Front Panel LEDs LED Meaning 1 Power A steady light confirms that the NetServer Pro is powered on. ENGLISH 2 USB Steady light confirms that the print server has a good connection to a printer. When it blinks, the printer connected is printing. 3 LAN Steady light confirms that the print server has a good connection to your network. When it blinks (briefly dark), the print server is receiving/ transmitting data from/to the network. 4 WLAN Steady light confirms that the print server has a good connection to your wireless network. When it blinks (briefly dark), the print server is receiving/ transmitting data from/to the wireless network. 1.3 The Rear Ports Port Meaning 1 LAN The NetServer’s Pro rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100BaseTX Fast Ethernet cabling. 2 USB There is a fast USB connector located on the rear panel of the NetServer Pro, providing connection for one Printer. 3 POWER (jack) Connect the supplied power adapter to this jack ENGLISH 4 RESET Press this button for 10 seconds to restore factory default setting. 1.4 Default Settings Before you configure the NetServer Pro, you need to know the following default settings: • Password: • Username: • IP address : 192.168.0.1 1.5 Cabling Follow these steps for a trouble-free start of the print server operations with your print server. 1. Confirm proper operation of the printer to be connected to the print server. 2. When you have confirmed proper operation of the prin...