Оценок - 4, средний балл: 4.5 ( )

Производитель: Kenwood Размер: 2.08 mb Название файла: Язык инструкции:

If this happens, follow the procedure below to change the clock time. To change the clock time : 1 Press the CLOCK button. 2 Within 5 seconds, press the MEMORY/SET button. 3 Perform steps 6 -9 on page 11 . To change the time display mode : 1 Perform steps 1 -2 in the section “RESETTING THE MICROCOMPUTER”, on page 37. 2 Perform step 1 -9 on page 11. SETTING THE CHANNEL SPAN (Except for the Europe and U.K.) The span between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel span setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel span setting in accordance with your area by refering to the following table. Area CHANNEL SPAN freq. 1 USA, Canada and Latin America Countries FM : 100 kHz AM : 10 kHz 2 Other countries FM : 50 kHz AM : 9 kHz 1 Press the ON/STANDBY button to enter the standby mode. 2 Set the SPAN SELECTOR switch to “50/9” for 9 kHz AM interval (50 kHz FM interval), and “100/ 10” for 10 kHz AM interval (100 kHz FM interval). 3 Whilst pressing down the 7 STOP button and the SOUND MODE button, hold down the ON/STANDBY button for at least 1 second. • “CLEAR AL” will appear. Caution : • The operation explained above will erase all data stored in memory including clock and timer settings, and tuner and CD presets. 12 EN SOUND CONTROL Volume (Main unit operation) When the VOLUME CONTROL is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. (Remote control operation) Press the VOLUME up button (%) to increase the volume and the VOLUME down button (fi) to decrease the volume. Extra bass When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “Ex. BASS” will light up on the display. To cancel the extra bass mode, press the EX. BASS/ DEMO (EX. BASS) button, and “Ex. BASS” will goes off. Pre-programmed equalizer When the SOUND MODE button is pressed, the current equalizer mode setting will be displayed. To change to a different mode, press the SOUND MODE button repeatedly. FLAT : The sound is not modified. ROCK : Bass and treble are emphasised. POPS : Bass and treble are slightly emphasised. JAZZ : Treble is cut a little. CLASSIC : Treble is reduced a lot. SAMBA : Treble is slightly emphasised. • When ROCK, POPS, JAZZ, CLASSIC or SAMBA is selected, “EQ” will light up on the display. Main unit Remote control Main unit Remote control Main unit Remote control FLAT ROCK POPS SAMBA CLASSIC JAZZ 13 EN COMPACT DISC OPERATION 12 cm (5") 8 cm (3") 7 8 7 STOP CD playback 1 Press the ON/STANDBY button to turn the power on. 2 Press the CD button. 3 Press the 0 OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. • CDs can be placed on any open position on the disc tray. • Be sure to place 8cm (3”) CD(s) in the middle of the disc trays. Caution : Do not stack CDs in the tray. This can damage the player and the CDs. 5 When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. 6 Press the 0 OPEN/CLOSE button to close the disc tray. • The total number of tracks and the total playing time for one disc will be displayed. At this time, the disc number indicator is flashing. • The music schedule will be displayed only for the number of tracks on the disc. 7 Press the desired disc number button ( DISC 1 DISC 3). 8 Press the 3 button. • Playback will begin from track 1 on the disc you have selected to play. • After the disc finishes playing, the next disc will automatically play. • When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. • When the last track on the third disc has finished playing, the unit will stop automatically. 14 EN To interrupt playback : 1 Press the 8 button on the remote control. •“8” will light up on the display. 2 Press the 3 button to resume playback from the same point. To stop playback : Press the 7 STOP button. To remove the CDs : Whilst in the stop mode, press the 0 OPEN/CLOSE button. • The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. After use : Press the ON/STANDBY button to enter the standby mode. 2 DISC 1 - DISC 3 1 1 2 Cautions : • Do not carry the unit with discs left in the disc trays. The disc may get displaced inside the unit and damaged or cause damage to the unit. This may also cause malfunctions. • Do not place two CDs in one disc position. • Do not push the disc tray whilst it is moving. • Do not attempt to turn the disc tray by hand. This may cause malfunctions. • If the power fails whilst the tray is open, wait until the power is restored. • If the dis...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: