Exterior bottom to be 14-gauge galvanized steel. Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.25” (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip. Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles. (1) stainless ste

drain. Unit shall be insulated with high-density, foamed in place polyurethane insulation with a non-conductive top breaker strip. Opening shall have stainless steel lift-up and fold-down lids with black plastic recessed handles. Door lock is standard. Ends of the upperstructure shall have die-stamped louvers to allow proper air flow to the condensing unit. Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 3

Top and corner supports shall be 16-gauge stainless steel, welded, ground and polished into one integral unit. Interior liner shall be water-tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation with a non-conductive top breaker strip. Refrigerated compartment

Shelleymatic® by Deleld N6/N10/N14 Free-Standing Self-Contained Milk Or Beverage Dispensers Project __________________________________ Item ____________________________________ Quantity ________________________________ CSI Section 11400 Approved _______________________________ Date ____________________________________ N6-1313-34 6 crate capacity, 34” height N6-1313-36 6 crate capacity, 36” height N10-1313-34 10 crate capacity, 34” height • • • N10-1313-36 10 crate capacity, 36” height N14-1313-3

N6/ N10/ N14 Free- Standing Self- Contained Milk Or Beverage Dispensers Specifications Model Unit Height Crate Capacity H.P. Amps BTU Load BTU Capacity Ship Weight N6-1313-34 34” (86.4cm) 6 1/4 5.0 250 1170 382 lbs/ 173 kg N6-1313-36 36” (91.4cm) 6 1/4 5.0 250 1170 402 lbs/ 182 kg N10-1313-34 34” (86.4cm) 10 1/4 5.0 350 1320 545 lbs/ 247 kg N10-1313-36 36” (91.4cm) 10 1/4 5.0 350 1320 565 lbs/ 256 kg N14-1313-34 34” (86.4cm) 14 1/4 5.0 460 1420 650 lbs/ 295 kg N14-1313-36 36” (91.4cm) 14 1/4 5.0

14-gauge exterior bottom applies to self contained models only. Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip. Each opening shall have an insulated, stainless steel folding lid with aluminum liner, molded rubber edge and black plastic handles. Each self-l