Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
R210, PU. R220, PU. R300 and PU. R310 Manual para uso y mantenimiento PU. R200, PU. R210, PU. R220, PU. R300 y PU. R310 Manuel d’utilisation et d’entretien PU. R200, PU. R210, PU. R220, PU. R300 et PU. R310 by/de/par k Manufacturing Quality Healthcare Products for Over 75 Years Fabricando productos de atencion de la salud de calidad durante mas de 75 anos Fabriquant des produits de soins de sante de qualite depuis plus de 75 ans IMPORTANT For warranty service or product performance concerns, please contact Consumer Relations FIRST for resolution. By telephone: 1-800-447-0457 By e-mail: consumerrelations@kaz.com Visit our website at Or write us at: Kaz, Inc. Consumer Relations Dept. 250 Turnpike Rd. Southborough, MA 01772 Table of Contents Safety Precautions Unpacking and Parts Setting Up Your Water Cooler Pre-activating & Installing the Filter System How to Monitor Filter Life Key Features Proper Care and Cleaning Storing Unit Frequently Asked Questions Troubleshooting Warranty Technical Specifications Performance Data Sheet Safety Precautions READ ALL OF THE INSTRUCTIONS BEFORE USE: 1. This water filtration system is designed for INDOOR USE ONLY and should not be used outdoors. 2. Use this system only for its intended purpose as described in this use and care guide. 3. Install system on a firm level floor away from radiators.. 4. Allow the system to stand in an upright position for at least 30 minutes before turning on the power to allow all cooling refrigerant to settle. 5. Allow at least 1" of space for ventilation around the sides of the unit for air circulation and electrical connections. Do not recess or build into an enclosed cabinet. 6. Close supervision is necessary when system is used by or near children. 7. Do not plug in unit until system is completely assembled and filled with water. Unplug your water cooler before cleaning. 8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area where it will not be tripped over. This product is for use on 120 volts. The cord has a grounded plug. An adapter is available at retail (not included) for connecting three blade grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available. This product draws 450 watts during operation. To prevent overloading a circuit, do not plug the product into a circuit that already has other appliances working. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet. To disconnect the product, first turn controls to the OFF position, then grip the plug and pull it from the wall outlet. Never pull by the cord. 9. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems that are certified for cyst reduction may be used on disinfected water that may contain filterable cysts. Individuals requiring water of specific microbiological purity should consult their physician. SAVE THESE INSTRUCTIONS for future use. ENGLISH1 Unpacking and Parts UNPACK AND REMOVE ALL PACKAGING MATERIALS. Check to make sure that all parts are present and in good condition. If you find that they are not in good condition or are missing, please contact our Consumer Relations Department for assistance. Our Toll-Free number is 1-800-447-0457 Baffle Hot Water Safety Lock Fill Tank Fill Cap Filter Tray Filters Reservoir Float Valve Heating and Cooling Lights Nightlights (2) Push Buttons for Water Drip Tray Grille Drip Tray Basin Light Switch Cooling Coils LIGHT HOT WATER WATER COLD WATER Cold Temperature Knob Power Switch Hot Water Switch Drain Plug Grounded Power Cord Setting Up Your Water Cooler SETTING UP YOUR WATER COOLER 1. DO NOT PLUG UNIT IN 2. Allow the water cooler to stand in an upright position for at least 30 minutes before turning on the power to allow all cooling refrigerant to settle. 3. Allow at least 1" of space for ventilation around the sides of the unit for air circulation and electrical connections. 4. Select a firm level floor for system away from radiators. Pre-activating & Installing the Filter System HOW TO INSTALL FILTERS: 7. INSERT FILTER • Insert filter into filter tray by lining up the notches on the filter with the grooves in the filter tray. (See figure 9A) • When the filter has dropped into the grooves, twist the filter 45 degrees according to the arrow on the filter tray to lock and seal the filter into place. Each filter goes into the filter tray in an opposite direction. (See figure 9B) • Filter should feel snug in filter tray. • Do not try to force the filter in when it is not lined up as it m...
Эта инструкция также подходит к моделям:Диспенсеры - Water Cooler PUR210 (1.62 mb)
Диспенсеры - Water Cooler PUR220 (1.62 mb)
Диспенсеры - Water Cooler PUR300 (1.62 mb)
Диспенсеры - Water Cooler PUR310 (1.62 mb)