Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
7 Temperature Settings Temperature Settings TEST Key: If this Key is pressed in Standby state, the compressor and electric heating device will operate at the same time, and Compressor Indicator LED and Electric Heating Indicator LED will come on at the same time. When this key is released, the system returns to previous standby state. This key is invalid in operational state. Notes: 1. There should be at least 5-minute interval between compressor stopping and starting again. The compressor should operate for at least five minutes after it is started up and then its operation can be stopped depending on actual conditions. 2. The temperature indicating range of Digital Display 1 and Digital Display 2 is 32°F - 99°F. When the temperature is below 32.F in the storage cabinet, indicated temperature is 000, and when the ambient temperature is above 99°F in the storage cabinet, the indicated temperature is 99°F. 3. The difference of temperature displayed on Digital Display 1 and Digital Display 2 should be above 41°F. 4. The temperature setting range of upper layer (54°F - 72°F) and lower layer (41°F - 54°F) are effective when the ambient temperature is 90°F, otherwise it would be difficult to reach the lowest setting temperature of upper layer and lower layer. 5. The difference between display temperature and setting temperature is ±3°F, when the cabinet temperature is balanced. 8 Layout and Storage Layout and Storage Your Wine Vault was designed to be flexible, to be able to adapt to your requirements. Many bottle may differ in size and dimensions. As such, the actual number of bottles you may be able to store may vary. WARNING: Shelves have protective notch feature which prevents shelf from rolling out of track when loaded or unloaded with wine bottles. Shelves should be gently rolled out to their maximum extension. However, do not pull shelves out with excessive force, as this may allow the shelf to jump out of the track, resulting in the shelf to drop to the fl oor, creating a hazardous situation. Different Types of Layout: Storage Shelf Ref: AXL Capacity: 61 Bottles Max. Weight: 187 ibs. Storage Shelf Ref: AXM Capacity: 8 Bottles Max. Weight: 33 lbs. How To Use Your Storage Shelf (AXL): Fitting shelf brackets (read carefully if you intend to modify your cabinet's shelf positions) Storage Shelf To move a storage shelf, first remove all bottles, then move the shelf brackets and make sure to fit them back into slots as shown below: 9 Layout and Storage Layout and Storage Sliding Shelf To move a sliding shelf, first remove all bottles, then remove the sliding shelf by sliding it towards you while lifting the front part. Remove the sliding guides from the walls, while making sure not to mix up the right and left guides. Then refit them as shown here: Then refit the sliding shelf as shown below: WARNING: Shelves have protective notch feature which prevents shelf from rolling out of track when loaded or unloaded with wine bottles. Shelves should be gently rolled out to their maximum extension. However, do not pull shelves out with excessive force, as this may allow the shelf to jump out of the track, resulting in the shelf to drop to the floor, creating a hazardous situation. 10 Layout and Storage Layout and Storage All slide wooden shelves VW-50 VW-100 VW-150 (35 bottle maximum capacity) (72 bottle maximum capacity) (100 bottle maaximum capacity) 11 Layout and Storage Layout and Storage Ball Bearing Shelf: To move a ball bearing shelf, first remove all bottles, loosen the screws on the shelf, slide out the shelf, remove the sliding guides from the walls, then refit them as shown below, and fix the screws. Guide Wall Guide Wall Recommendations Your cabinet was designed to store a maximum number of bottles in total security. We recommend that you observe the tips below to optimize loading. • Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in one point. Also make sure your bottles do not touch the back of the cabinet, or the step at bottom. Also make sure that bottles are not all grouped together at the top or bottom of the cabinet. • Observe the loading instructions pr...
Эта инструкция также подходит к моделям:Диспенсеры - WV-100 (674.92 kb)
Диспенсеры - WV 50 (674.92 kb)
Диспенсеры - WV 150 (674.92 kb)
Диспенсеры - WV 150 (674.92 kb)