Оценок - 2, средний балл: 3
(
)
)
|
Фото и характеристики Sony PCM-M10 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Other operations • To resume normal playback: Press N PLAY/ENTER. • To stop A-B Repeat playback: Press x STOP. • To change the segment specified for A-B Repeat playback: During A-B Repeat playback, press (repeat) A-B again to specify a new starting point A. Then specify a new finishing point B, as in step 2. Other Playback Operations 53 53 GB Changing the Playback Sounds Changing the Playback Sounds MENU N PLAY/ ENTER > FF/ v, . FR/ V x STOP When you slide the DPC (SPEED CTRL) (Digital Pitch Speed Control) switch to “ON,” you can adjust the playback speed between +100% and –75% of normal speed in the menu. The track is played back in natural tones thanks to the digital processing function. 1 Slide the DPC (SPEED CTRL) switch to “ON.” 2 Press MENU to enter the menu mode. The menu mode window will be displayed. 3 Press > FF/ v or . FR/ V to select “DPC(Speed Control),” and then press N PLAY/ENTER. 4 Press > FF/ v or . FR/ V to adjust the playback speed. Press > FF/ v to increase the speed, or . FR/ V to make it slower. Every time the button is pressed, you can decrease the speed by 5% for – from –75% to 0%, and increase the speed by 10% for + between 0% and 100%. 54 54 GB Press N PLAY/ENTER to execute the playback speed. 6 Press x STOP to exit the menu mode. 7 Press N PLAY/ENTER to start playback. Tracks are played back at the selected playback speed. To resume normal playback Slide the DPC (SPEED CTRL) switch to “OFF.” Adjusting the playback tones – Key Control N PLAY/ ENTER > FF/ v, . FR/ V MENU x STOP You can adjust the playback sounds in semitones higher or lower, each in 6 step (Key Control), whichever is best suited for practicing songs to the recorded accompaniment. 1 Press MENU to enter the menu mode. The menu mode window will be displayed. 2 Press > FF/ v or . FR/ V to select “Key Control,” and then press N PLAY/ENTER. Other Playback Operations 55 55 GB Press > FF/ v or . FR/ V to adjust the playback tone. Press > FF/ v to adjust the sounds by a halftone higher (#1 to #6), or . FR/ V to adjust it by a halftone lower (21 to 26), each in 6 steps. 4 Press N PLAY/ENTER to set the playback tone. 5 Press x STOP to exit the menu mode. 6 Press N PLAY/ENTER to start playback. Tracks are played back at the selected tone. The setting ( #1 to #6, 21 to 26) is displayed on the display window. Key control setting To resume normal playback sounds Select “0” in step 3. Reinforcing the bass sound – Effect N PLAY/ ENTER > FF/ v, . FR/ V MENU x STOP You can set the bass sound you want for the playback in the menu. 56 56 GB 1 1 The menu mode window will be displayed. 2 Press > FF/ v or . FR/ V to select “Effect,” and then press N PLAY/ ENTER. 3 Press > FF/ v or . FR/ V to select effect you want for the playback, and then press N PLAY/ENTER. 4 Press x STOP to exit the menu mode. 5 Press N PLAY/ENTER to start playback. Tracks are played back with the selected effect. P Notes • When you play back using the built-in speaker, this setting does not work. • When “LINE OUT” is selected in “Audio Out” in the menu, the Effect function does not work. Other Playback Operations Bass1 Emphasizes the bass sound. Bass2 Emphasizes the bass sound even more. OFF The Effect function does not work. 57 57 GB Playback via Other Devices Playback via Other Devices Tape recorder, etc. i/LINE OUT jack Audio connecting cable x STOP N PLAY/ENTER You can record the sound of the PCM recorder with other equipment. Before you start recording, we recommend you to make a trial recording first. 1 Connect the i/LINE OUT (headphone/ line output) jack of the PCM recorder to the audio input connector (stereo minijack) of other equipment using an audio connecting cable. 2 Press MENU to enter the menu mode in the stop mode. The menu mode window will be displayed. 3 Press > FF/ v or . FR/ V to select “Detail Menu,” and then press N PLAY/ENTER. 4 Press > FF/ v or . FR/ V to select “Audio Out,” and then press N PLAY/ ENTER. 58 58 GB 5 5 “Headphones” is selected when you purchase the PCM recorder. 6 Press x STOP to exit the menu mode. 7 Press N PLAY/ENTER to start playback and at the same time set the connected equipment to the recording mode. A track from the PCM recorder will be recorded on the equipment connected. 8 Press x STOP on the PCM recorder and the connected equipment at the same time to stop recording. P Notes • To listen playback with the headphones, set “Audio Out” to “Headphones” (page 50). • If input from an external equipment is distorted, select “Headphones” in step 5 and adjust the volume with VOLUME +/– buttons. • When “LINE OUT” is selected, the Effect function does not work. • While the “LINE OUT” is selected, you cannot adjust the output volume with the VOLUME +/– buttons. Other Playback Operations 59 59 GB Editing Tracks Editing Tracks Using a track mark > FF/ v, . FR/ V MENU N PLAY/ENTER T-MARK x STOP Adding a track mark You can add a track mark at a point at which you would like to divide a track later or locate during playback. You can ad...