Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
[Format] will appear on the display 3 Press the `/OK or 9 button. 6 Press the 2button to select [Start]. 7 Press the `/OK button. • After the [ Data Will Be Cleared] message is on for two seconds, [Cancel] will turn on. 8 Press the 2 button again to select [Start]. 4 Menu Setting 43 Formatting the Recorder [Format] ormatting the Recorder [Format] 9 Press the `/OK button. Notes • When an SD Card is inserted in the recorder, be sure to confirm the recording media as either the [Built-in Memory] or the [SD Card] so that there is no mistake (. P.34, P. 39) . • When attempting to perform operations such as rewriting the contents of an SD Card in cases where the card has been write protected, [SD Card Locked] will appear. The playback operation can be per formed, but the write protection must first be turned off when overwriting the ] flashes • Formatting begins and [ Format ! contents on the card (. P.15). Never perform operations such as the following on the display. • • [Format Done] appears when formatting while processing, as they may damage the ends. data. In addition, replace the batteries with two new ones in order to ensure that the batteries will not run out while processing. 1 Turning off the power while processing. 2 Removing the batteries while processing. 3 Remove the [SD Card] during processing when it is being used as the rec ording media. Performing any of these operations may dam age the data. • Never format the recorder from a PC. • Once the recorder is formatted, the music files with DRM may not be transferred to the recorder again. • When the recorder is formatted, all the saved data, including locked files and read-only files, are erased. • After formatting, recorded audio file names may start from [0001 ]. • When returning the settings for the functions to their initial settings, use the [ Menu Reset] (. P.34, P.41 ) . • Formatting on the recorder will be Quick Format (SD card). 4 Menu Setting 44 Rearranging files [Replace] ] You can move a file in a folder to change the order • The cursor will flash to confirm that the file 2 3button 9 0button `/OK button MENU button of playback. First select the folder (file) for which you want to change the playback order. 1 Select the folder for which you would like to rearrange the song order (. P.16 to P.18). can be moved. 7 Press the 2or 3 button to select the location to move it to. 2 While the recorder is during stop mode, press the MENU button. • The menu will appear on the display. You can also change to [Others] screen by using the settings tab (. P.34). 3 Press the 2 or 3 button to select [Replace]. 4 Press the `/OK or 9 button. 8 Press the `/OK button to complete the setup screen. • If there are more files to move, repeat Steps 5 through 8. • Pressing the 0 button without pressing the `/OK button will cancel the settings and return you to the previous screen. 9 Press the MENU button to close the menu screen. 4 Menu Setting 5 Press the 2or 3button to select the file you want to move. Note 6 Press the `/OK or 9 button. • When attempting to perform operations such as rewriting the contents of an SD Card in cases where the card has been write protected, [SD Card Locked] will appear. The playback operation can be performed, but the write protection must first be turned off when overwriting the contents on the card (. P.15). 45 Using the Recorder on Your PC Using the Recorder on Your PC By being connected to a PC, the recorder enables you to do the following: Notes • This is an operational environment for saving the files recorded by this recorder to your PC • You can transfer f iles rec o rded with this recorder to a computer, play them back, and manage them by using Windows Media Player or iTunes (. P.50, P.57). • In addition to its uses as an IC recorder and a music player, this recorder can also be used as external memory for a computer by storing data from a computer and reading it back out (. P.49, P.61). Operating Environment with USB connection. • To chec k t he operational environment of [Steinberg CUBASE LE4] software, see a supplied separate sheet. • Even if operational environment is satisfied, we do not support such as 64-bits OS, the multi- boot environment and self-modified PC’s. Precautions on using the recorder connected to a PC • When you are downloading a file from the recorder or uploading a file to the recorder, do not remove the USB cable even if the screen is indicating you can. Data is still being transferred while the [ PEAK ] indicator light is blinking. When removing the USB cable, be sure to follow the description in . P.48. If the USB cable is removed before the drive is stopped, data may not be successfully transferred. • On a PC, do not format the drive of the recorder. Initialization is not successfully achieved on a PC. For initialization, follow the instructions in the [Format] screen of the recorder (. P.43). 5 Using the Recorder on Your PC Windows Operating System : • Folder (director y) names appeared by file man...
Эта инструкция также подходит к моделям:Диктофоны - LS‑10 (3.4 mb)