|
Фото и характеристики Philips WACS700 |
Фрагмент инструкции
Unauthorized copying, reproduction, hiring, lending, public performance and broadcasting prohibited. © 2004 Royal Philips Electronics / 3141 078 70071. Windows and Pentium are trademarks of Microsoft Corp. All other trademarks belong to their respective owners. System requirements: • Windows 98 (SE) / ME / 2000 / XP (Home and Professional) • Pentium Class 300MHz processor or higher • CD-ROM drive • Ethernet port • Free hard disk space 500MB for the software CD contains: • Digital Media Manager • Network Setup • Manual & FAQs • Registration & Upgrades Wireless Music Center PC installer You can connect WAC700 Center to your PC or existing home network.. For common users, Express Installation provides WAC700’s standard PC connection. Express Installation IMPORTANT! – When using a router, keep it at least 0.5 meter away from WAC700 Center. Preparation for installation On WACS700: 1 Check you have finished the Wi-Fi connection between WAC 700 Center and WAS700 Station. (See Quick Start Guide, Step A) 2 Check yourWAC700 Center is switched on or to standby mode On your PC or existing PC network: 1 Switch on the PC with administrator's privileges. 2 Close all the applications on your PC, including the internet connection 3 Connect the supplied Ethernet cable (straight cable) to Center’s ETHERNET port 4 Insert the installer CD into your PC and select your desired language Tips: – You can also start up the installer CD by running WAC_installer. exe on the CD-ROM driver. Express Installation AUX IN R L R L LINE OUT AUX IN R L R L LINE OUT Center ETHERNET Expr ess Instalation Express Installation Express Installation Option 1: Direct connection Choose this option if you want to connect Music Center to a Standalone PC without LAN/Wireless Network 1 In Software Installation page, click to select Music Center connect to Standalone PC, no LAN/Wireless Network 2 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is connected to Center’s ETHERNET port 3 Follow the screen instructions to finish the PC connection. . The screen shows: “The connection to your Music Center has been established” 4 Click Next to start DMM installation. . The icon appears on your computer desktop after DMM installation is finished. Tips: – If your PC is also connected to Internet via XDSL modem, use a wired router or wireless access point and follow the installation steps of Option 2 and Option 3. Otherwise, manually change your PC’s IP from its orginal one to IP address: 192.168.107. 20, Subnet mask: 255.255.255.0 or vice versa. To configure your IP, go to Start menu - Settings - Control Panel - Network Connections – Properties. Scroll to Internet Protocol (TCP/IP) . Option 2: Wireless connection Choose this option if you want to con- nect Music Center to a wireless. Router/ wireless Access Point or an existing wireless network 1 Check the wireless router/access point is working properly. Write down its SSID and also the WEP or WPA key if it is enabled in the router/access point 2 In Software Installation page, click to select Music Center connect to Wireless Network 3 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is con- nected to Center’s ETHERNET port 4 When the screen on the right appears, a. Input the SSID you wrote down in the above step 1 b. In WLAN mode, click Infrastructure mode c. Input the WEP or WPA key you wrote down in the above step 1 5 Follow the screen instructions to finish the PC con- nection. . The screen shows: “The WiFi settings of Music Center have been changed. ...... ” Tips: – It is recommended that WEP key encryption be used for better network performance and security. – In Infrastructure mode, Channel is assigned automatically by the router/access point. Express Installation 6 To apply new settings on WACS700, you need to let both Center and Station enter Installation Mode. On Center: a. Select HD. b. Press MENU c. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu d. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New Station e. Press STOPC to exit Installation Mode when Center has found all the stations On Station: a. Select AUX. b. Press MENU. c. Use the navigation controls 3 or 4 and 2 to select Installation Mode 7 Click Next to start DMM installation. . The icon appears on your computer desktop after DMM installation is finished. 8 Disconnect the supplied Ethernet cable from your PC and Center., and then, connect your PC to the wireless router/access point. Option 3: Wired connection Choose this option if you want to connect Music Center to an existing wired network with wired router 1 Check the wired router is working properly and enable its DHCP. 2 In Software Installation page, click to select Music Center connect to Wired Network 3 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is connect...
Эта инструкция также подходит к моделям:Автоакустика - WACS700/37 (1.1 mb)