Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press C to increase the selected number. Holding down C changes the number at high speed. • To set the starting value of the countdown time to 24 hours, set “0:00”. 4. After you set the countdown time, press A to exit the setting screen. To use the countdown timer Minutes 1. Press A while in the Countdown Alarm Mode to start Hours Minutes Seconds the countdown time. Hours • To stop a countdown operation, press A. Pressing A again resumes the countdown. • To restart the countdown, stop it and then press C to reset to the starting value. 2. When the end of the countdown is reached, the alarm sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown timing stops, and the countdown time is automatically reset to its starting Hours Minutes value after the alarm stops. Starting value DAY COUNTER MODE There are five day counters, each identified by a counter number. The initial default date for all Day Counters is 2001/1/1. When setting the year, you need to specify only the rightmost two digits. To specify the year 1970, for example, set 70. To specify the year 2015, set 15. You can set the year, month, and day for a day counter, or a month and day only. Setting a Year, Month, and Day Setting a year, month, and day displays the number of days from the preset date to the Timekeeping Mode date. There is no indication of whether the preset date is before or after the Timekeeping Mode date. • You can use this type of setting to keep track of the number of days since you were born or the number of days you have been married, or to count down the number of days until graduation, etc. Setting a Month and Day Only Target date With this type of setting, you specify “ – – ” for the year. The “ – – ” setting is located between the years 39 (2039) and 40 (1940). Setting a month and a day without a year displays the number of days left until that month and day. Day counter’s number Number of days Year Day Month • You can use this type of setting to count down the number of days until your next birthday, etc. Recalling Day Counter Data In the Day Counter Mode, press C to scroll through the day counters. To set the target date 1. In the Day Counter Mode, press C to display the number of the counter you want to set. 2. Hold down A until the year digits start to flash on the display. This indicates the input screen. 3. Press B to move the flashing in the sequence shown below. Press B. Year Month Day 4. Press C to increase the selected digits. Holding down C changes the digits at high speed. • Holding down B sets today as the target date. You can then make any changes in the date you want. 5. After you make the settings you want, press A to exit the input screen. • The date can be set within the range of January 1, 1940 to December 31, 2039. 2182/2189/2289-2 ALARM MODE You can set three independent alarms. Use the Alarm Alarm on Mode Mode to turn the alarm and the Hourly Time Signal on indicator indicator Minutes Hour Alarm number Hourly time signal on indicator and off. • When an alarm is turned on, an alarm tone sounds for 20 seconds when the preset time reached. • When the Hourly Time Signal is turned on, the watch beeps every hour on the hour. To set the alarm time 1. Press C while in the Alarm Mode to select Alarm 1 through Alarm 3. Press C. Alarm 1 Alarm 2 Alarm 3 Hourly Time Signal 2. After you select an alarm, hold down A until the hour digits start to flash on the display. The hour digits flash because they are selected. At this time the Alarm is automatically switched on. 3. Press B to change the selection in the following sequence. Press B. Hour Minutes 4. Press C to increase the selected digits. Holding down C changes them at high speed. • The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping. • When setting the alarm time using the 12-hour format, take care to set the time correctly as morning or afternoon. 5. After you set the alarm time, press A to return to the Alarm Mode. To stop the alarm Press any button to stop the alarm after it starts to sound. To switch an alarm and Hourly Time Signal on and off 1. In the Alarm Mode, press C to select an alarm or the Hourly Time Signal. 2. When the alarm or Hourly Time Signal you want is selected, press D to switch it on and off. • If any alarm is on, the Alarm On indicator is shown on the display when you change to another mode. Alarm on indicator Hourly time signal on indicator To test the alarm Hold down B in any mode (except when a setting screen is on the display) to sound the alarm. Note that this operation also changes the ...
Эта инструкция также подходит к моделям:Часы - 2182 (95.83 kb)