Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
• If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen. The operational procedures for Modules 2182, 2189 and 2289 are identical. All of the illustrations in this manual show Module 2189. Timekeeping Mode Countdown Alarm Mode Day Counter Mode Alarm Mode Press B. [Module 2289] [Modules 2182, 2189] TIMEKEEPING MODE Day • When using 12-hour timekeeping, a P appears on the Minutes Seconds Day of week PM indicator Hour Month display for “pm” times (noon to 11:59 pm). An “am” time (midnight to 11:59 am) is indicated when there is no P indicator on the display. 24-hour timekeeping is being used when the 24 indicator is on the display. • Pressing C in the Timekeeping Mode illuminates the display for about two seconds. The backlight is disabled while a setting screen is on the display. Caution • The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. • Frequent use of the backlight shortens the battery life. • The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch. Setting the Time and Date There are two different ways to set the time. The procedure you should use depends on whether you want to make major changes or minor changes to the current setting. When you want to do this: Use this procedure: Make major changes to the time and date setting (before using the watch for the first time, after having the battery replaced, etc.) “To make major time and date settings” Make minor adjustments (within about 30 minutes of the current setting) to the time setting “To zero-reset the minutes and seconds (EASY ADJUST)” To make major time and date settings 1. While in the Timekeeping Mode, hold down A until the seconds digits flash on the display. This indicates the setting screen. 2. Press B to move the flashing in the sequence shown below. Press B. Seconds Day Hour Minutes Year 12/24Month 3. While the seconds setting is selected (flashing), press C to reset it to 00. • If you press C while the seconds setting is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged. • While the 12/24 setting is selected, press C to toggle it between 12-hour and 24hour timekeeping. 4. While any other digits are selected (flashing), press C to increase the selected digits. Holding down C changes them at high speed. 5. After you make the settings you want, press A to exit the setting screen. • The day of the week is automatically set in accordance with the date. • The date can be set within the range of January 1, 2000 to December 31, 2039. • When setting the year, you need to specify only the rightmost two digits. To specify the year 2001, for example, set 01. • The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after the replacement of the watch’s battery. To zero-reset the minutes and seconds (EASY ADJUST) Press D when the time on which you want to zero-reset the minutes and seconds arrives. • The watch beeps to let you know that the minutes and seconds were reset to 00 00. • If you press D while the minutes count is in the range of 30 to 59, they are reset to 00 and 1 is added to the hour. If the minutes count is in the range of 00 to 29, the hour count is unchanged. • The watch’s EASY ADJUST feature is disabled while the daily alarm or countdown alarm is sounding. Pressing the D button while an alarm is sounding stops the alarm without zero-resetting the minutes and seconds. COUNTDOWN ALARM MODE Mode indicator The countdown timer can be set within a range of 1 minute to 24 hours. When the countdown reaches zero, an alarm sounds for 10 seconds or until you press any button. To set the countdown time Note that you cannot change the countdown time setting while a countdown is being performed. First press A to stop the countdown and then press Cto return the countdown time to its starting value. 1. Hold down A while in the Countdown Alarm Mode until the hours digit flashes on the display. The hours digit flashes because it is selected. 2. Press B to change the selection in the following sequence. Press B. Hours Minutes 3. Press C to increase the selected number. Holding down C changes the number at high speed. • To set the...
Эта инструкция также подходит к моделям:Часы - 2289 (95.83 kb)