Оценок - 4, средний балл: 3
(
)
)
|
Фрагмент инструкции
Warning! • The measurement functions built into this watch are not intended for use in taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonably accurate representations only. • The longitude, lunitidal interval, Moon phase indicator and tide graph data that appear on the display of this watch are not intended for navigation purposes. Always use proper instruments and resources to obtain data for navigation purposes. • This watch is not an instrument for calculating low tide and high tide times. The tide graph of this watch is intended to provide a reasonable approximation of tidal movements only. • CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this watch. About This Manual • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. General Guide • Press C to change from mode to mode. • In any mode (except when a setting screen is on the display), press B to illuminate the display. Stopwatch Mode World Time Mode Tide/Moon Data Mode Countdown Timer Mode Press C. Alarm Mode Timekeeping Mode Timekeeping Use the Timekeeping Mode to set and view the current time and date. • The tide graph shows tidal movements for the current date in accordance with the current time as kept in the Timekeeping Mode. • The Moon phase indicator shows the current Moon phase in accordance with the current date as kept in the Timekeeping Mode. Important! • Be sure to configure the current time and date, and your Home Site data (data for the site where you use the watch) correctly before using the functions of this watch. See “Home Site Data” for more information. Day of week Tide graph Month – Day Moon phase indicator Hour : Minutes Seconds PM indicator Setting the Time and Date This watch is preset with UTC differential values that represent each time zone around the globe. Before setting the time, be sure to set the UTC differential for your Home Site first, which is the location where you normally will be using the watch. • Note that World Time Mode times are all displayed based on the time and date settings you configure in the Timekeeping Mode. To set the time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. • Be sure to configure the correct UTC differential for your Home Site before configuring any other Timekeeping Mode settings. • See the “UTC Differential/City Code List” for information about the UTC differential settings that are supported. l lllll ll ll llll l Seconds 2. Press C to move the flashing in the sequence shown below to select other settings. UTC Hour Differential Minutes Year DST Day Month Seconds Flash Alert 3. When the setting you want to change is flashing, use D and B to change it as described below. Reset the seconds to 00 Toggle between Daylight Saving Time (ON) and Standard Time (OFF) Press D. Press D. Screen: To do this: Do this: • See “Daylight Saving Time (DST) Setting” below for details about the DST setting. • The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units. • When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in 0.5-hour units. • For information about Flash Alert, see “Flash Alert”. 4. Press A twice to exit the setting screen. • The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. Specify the UTC differential Change the hour or minutes Change the year, month or day Use D (+) and B (–). Use D (+) and B (–). Use D (+) and B (–). To toggle between 12-hour and 24-hour timekeeping In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24- hour timekeeping. • With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode time between DST and Standard Time 1.In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C once and the DST setting screen appears. 3. Press D to toggle between Daylight Saving Time (ON displayed) and Standard Time (OFF displayed). 4. Press A twice to exit t...