Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Starting second hand movement and digital display To conserve battery power, the watch is shipped from the factory with its functions disabled. Pressing any one of the watch’s three buttons will activate its functions, which will cause the second hand to start moving and the digital display to activate. TACHYMETER Your watch switches automatically between Standard Time and Daylight Saving Time (summer time). Note, however, that switching cannot be performed correctly if the watch is not able to receive the time calibration signal. If you notice that the current time is not displayed properly, use the procedure under “To perform manual receive” or “To set the time and date manually” to correct it. This watch does not have a Time Zone that corresponds to the Greenwich Mean Time differential of –3.5 hours. Because of this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland, Canada. About This Manual • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. TACHYMETER Hour hand Minute hand Date Second hand(Timekeeping/ Stopwatch) 24-Hour hand Stopwatch minute hand Stopwatch 1/20 second hand Hand Setting Mode Alarm Mode Dual Time Mode General Guide • Press C to change from mode to mode. • About 1.5 seconds after you enter the Dual Time Mode, Alarm Mode, or Hand Setting Mode the hands will move the position that indicates the current setting of the mode. You cannot change to another mode while the hands are moving. To change to another mode, either press C before the hands start to move, or wait until the hands stop before pressing C. • In Timekeeping mode (except when a setting screen is on the display), press B to illuminate the face of the watch. TACHYMETER Timekeeping Mode Press C. Stopwatch Mode Radio-controlled Atomic Timekeeping This watch receives a time calibration signal and updates its time setting accordingly. The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data. • This watch is designed to pick up the time calibration signal transmitted in the United States (Fort Collins, Colorado) and the time calibration signals transmitted in Japan. • The U.S. time calibration signal can be picked up by the watch while in North America*. * The term “North America” in this manual refers to the area that consists of Canada, the continental United States, and Mexico. Current Time Setting This watch adjusts its time setting automatically in accordance with a time calibration signal. You can also perform a manual procedure to set the time and date, when necessary. • The first thing you should do after purchasing this watch is to specify your Home Time Zone, which is the time zone where you will normally use the watch. For more information, see “To specify your Home Time Zone” below. • When using the watch outside the range of the time signal transmitter, you have to adjust the current time setting manually as required. See “Timekeeping” for more information about manual time settings. To specify your Home Time Zone 1. In the Timekeeping Mode, hold down A until the GMT differential value starts to flash, which indicates the setting screen. • The second hand will move at high speed to the 12 o’clock position, where it will stop. • The GMT differential value indicates the time difference in hours between Greenwich Mean Time and the currently selected time zone. • The DST indicator indicates that Daylight Saving Time (summer time) is turned on for the currently selected time zone. l l l llll l l l l l l l llll l ll DST indicator GMT differential value Minus sign 2. Use B (+) to select the time zone you want to use as your Home Time Zone. –5.0 (DST –4.0): New York, Miami, Toronto, Montreal, Detroit, Boston, Panama City, Havana, Lima, Bogota –6.0 (DST –5.0): Chicago, Mexico City, Winnipeg, Houston, Dallas/Fort Worth, New Orleans –7.0 (DST –6.0): Denver, Edmonton, El Paso –8.0 (DST –7.0): Los Angeles, Vancouver, San Francisco, Las Vegas, Seattle/Tacoma, Dawson City –9.0 (DST –8.0): Anchorage, Nome –10.0 (DST –9.0): Honolulu, Papeete +8.0 (DST +9.0): Hong Kong, Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth, Ulaanbaatar +9.0 (DST +10.0): Tokyo , Seoul, Pyongyang 3. Press A to exit the setting screen. • The second hand will advance at high speed to the correct position and resume normal movement from there. • Normally, your watch should show the correct time as soon as you specify your Home Time Zone. If it does not, it should adjust automatically after the next auto receive operation (in the middle of the night). You can also perform manual receive or you can set the time manually. • Selecting –5.0, –6.0, –7.0, –8.0, –9.0, –10.0, +8.0, or +9.0 ( –4.0, –5.0, –6.0, –7.0, –8.0, –9.0, +9.0, or +10.0 while DST is t...
Эта инструкция также подходит к моделям:Часы - MO0701-EB (587.75 kb)
Часы - MO0701-EB (587.75 kb)
Часы - MO0701-EB (587.75 kb)
Часы - MO0701-EB (587.75 kb)