Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
• A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch. • Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in the illustration. GENERAL GUIDE Every time the B button is pressed, the display is switched between TIME and STOPWATCH displays. STOPWATCH DISPLAY A button ..... Starts and stops timing. B button ..... Toggles between the current time and stopwatch screens. C button ..... Registers a lap/split time. R button ..... Recalls lap/split time records and total elapsed time. SPLIT TIME AND LAP TIME Split time (SPLIT) is the time elapsed from the start to a specific point. Lap time (LAP) is the time elapsed from one point to another or for one lap around a track. START 1ST SPLIT 2ND SPLIT 3RD SPLIT START 1ST LAP 2ND LAP 3RD LAP USING THE STOPWATCH A signal confirms A and C button operations. Working range The total elapsed time and split time display is limited to 9 hours 59 minutes 59.99 seconds. Lap time display is limited to 59 minutes 59.99 seconds. Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0. NORMAL TIME 0 a (a) START STOP RESET CHART BUTTON OPERATION DISPLAY NET TIME 0 a b (a) (a) (a + b) START STOP START STOP RESET CHART BUTTON OPERATION DISPLAY (Loss time) After stopping a net time operation by pressing A, you can resume it by pressing A again. LAP/SPLIT TIMES A maximum of 9 lap/split time records and total elapsed time are automatically stored into the memory, and recalled by pressing the R button. Once 9 lap/split time records are stored (counter shows a flashing value greater than 9), pressing C displays the current lap/split time, but does not store it in memory. 0 a (a) b (a + b) c (a + b + c) (t) START 1ST LAP 2ND LAP 3RD LAP 1ST SPLIT (a) 2ND SPLIT (a+b) 3RD SPLIT (a+b+c) STOP RESET CHART BUTTON OPERATION DISPLAY Operation Guide HS-30W 2 Recording the Finishing Times of Multiple Runners After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing times in memory, which you can recall by pressing the R button. *Recorded times are retained in memory until you start a new net time operation (by pressing A) after clearing the stopwatch screen to all zeros (by pressing C). Example : To record the times of 10 different runners. START 1ST RUNNER FINISHES 2ND RUNNER FINISHES 9TH RUNNER FINISHES 10TH RUNNER FINISHES CHART BUTTON OPERATION DISPLAY Difference between this runner’s record and the previous runner’s record Y o u can scroll through time records in memory by pressing , even while the stopwatch is still running. Press . Runner’s finishing position Runner’s record SETTING TIME AND DATE 1) Press C for a few seconds in TIME display to set time and date. 2) Press A on a time signal to correct seconds. 3) Press C shift flashing digit (s). Digit(s) to be changed will flash. SECONDS HOUR MINUTES YEAR MONTHDAY DAY OF THE WEEK 4) Each press of A increments digit. Keep pressed to move quickly. 5) Press B or C to complete setting. *Year digits can be set up to the year 2029. AUTO-retrieve function Display automatically returns to TIME if left unused for a few minutes. Operation Guide HS-30W 2 Recording the Finishing Times of Multiple Runners After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing times in memory, which you can recall by pressing the R button. *Recorded times are retained in memory until you start a new net time operation (by pressing A) after clearing the stopwatch screen to all zeros (by pressing C). Example : To record the times of 10 different runners. START 1ST RUNNER FINISHES 2ND RUNNER FINISHES 9TH RUNNER FINISHES 10TH RUNNER FINISHES CHART BUTTON OPERATION DISPLAY Difference between this runner’s record and the previous runner’s record Y o u can scroll through time records in memory by pressing , even while the stopwatch is still running. Press . Runner’s finishing position Runner’s record SETTING TIME AND DATE 1) Press C for a few seconds in TIME display to set time and date. 2) Press A on a time signal to correct seconds. 3) Press C shift flashing digit (s). Digit(s) to be changed will flash. SECONDS HOUR MINUTES YEAR MONTHDAY DAY OF THE WEEK 4) Each press of A increments digit. Keep pressed to move quickly. 5) Press B or C to complete setting. *Year digits can be set up to the year 2029. AUTO-retrieve function Display automatically returns to TIME if left unused for a few minutes. ...