Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Ironing on feature intended to help reduce the risk of any other surface may damage that surface. electrical shock. If you are unable to insert the plug into the outlet, try reversing the Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. This will clean the vents. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. • During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. 2 12 4 6 7 8 3 11 9 5 10 12 4 6 7 8 3 11 9 5 10 840094500 Ev01 12/17/01 8:48 AM Page 3 Know Your Iron 1 2 3 4 5 6 7 8 9 10 11 12 12 Fabric Setting Chart Temperature Setting Nylon Silk, Acrylic Steam Setting O Dry IronIroning Instructions Dry iron using spray if necessary. Dry iron on the wrong side of the fabric. Wool Use a press cloth and steam iron on the Steam Rangewrong side of fabric. Polyester Iron while fabric is still damp. Rayon Iron using spray if necessary. Cotton, Linen For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side. Removable Reservoir Release Button Spray/Blast Buttons Adjustable Steam Switch Water Tank Opening Spray Nozzle Removable Reservoir Self-Clean Button Temperature Control Dial Soleplate Automatic Shutoff Reset Button/Power On Light Heel Rest Cord 3 840094500 Ev01 12/17/01 8:48 AM Page 4 Using Your Iron To Dry Iron 1. Plug iron into outlet. 2. Set the Adjustable Steam Switch to O (the Dry Iron position) or empty water from reservoir. 3. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. 4. To turn iron Off, turn Temperature Control Dial to Off and unplug iron. To Steam Iron 1. Unplug iron. Fill Removable Reservoir according to directions. Replace Reservoir. 2. Plug iron into outlet. 3. Turn the Temperature Control Dial to desired fabric setting in the steam range. Set the Adjustable Steam Switch to the recommended steam level. See “Fabric Setting Chart” on page 3. 4. Allow two minutes for the iron to reach desired temperature. 5. To turn iron off, set Adjustable Steam Switch to O (Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron. 6. Empty water from the iron following directions in “Caring for Your Iron.” Water Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. To Remove, Fill, and Replace Reservoir NOTE: The reservoir can be filled in place or removed for filling. 1. Unplug iron. Set the Adjustable 3. Slide open reservoir fill opening Steam Switch to O (Dry Iron). cover. Slowly pour in 4 ounces of water. Close cover. 2. Press and hold release button and pull straight up 4. Firmly place reservoir in position and on reservoir. push until it snaps back into place. Use caution and do not let your hand touch the hot soleplate. 4 840094500 Ev01 12/17/01 8:48 AM Page 5 To Vertical Steam 1. Unplug iron. Fill the Removable Reservoir according to directions. Replace Reservoir. 2. Plug iron into outlet. 3. Turn the Temperature Control Dial to highest setting. 4. Allow two minutes for the iron to reach desired temperature. 5. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 6. Hold iron about 6 inches away from garment and press and release the Blast Button to steam out wrinkles. Do not press the Blast Button more than once every 2 seconds. 7. To turn iron off, turn Temperature Control Dial to Off. Unplug iron. 8. Empty water from the iron following directions in “Caring for Your Iron.” NOTE: Do not allow hot soleplate to touch delicate garments. Optional Features (on selected models) Adjustable Steam Switch – This switch provides minimum steam for wool or maximum steam for linen. Set the switch to O to change to Dry Iron. Spray and Blast of Steam Buttons – Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Blast Spray Automatic Shutoff Reset Button and Power On Light – The Reset Automatic Shutoff Button Reset Button light comes on when the iron is first plugged in. After one hour, Power the iron will shut Light off and the light will go out. Push the Reset Button to turn iron back on. The Power On Light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off. 5 840094500 Ev01 12/17/01 8:48 AM Page 6 Self-Clean To keep the steam vents clear of any build-up, follow these instructions after each time you use the iron using steam. 1. Fill Removable Reservoir according to 5. Turn Adjustable Steam Switch to directions Replace Reservoir. (Maximum Steam). Push and release the Self-Clean button...
Эта инструкция также подходит к моделям:Утюги - 840094500 (351.98 kb)