Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
This is made possible by incorporating a noise-shaping filter in the 24-bit A/D converter of this unit, which has a frequency range designed to cover the range of human hearing. During recording pause, press SBM. The indicator lights up. When you press the button again, the function is canceled and the indicator turns off. Notes • You cannot change the setting while recording. • When you record through the DIGITAL OPTICAL IN jack, or when you make Synchro-Recording, the SBM function is automatically canceled. Recording/Editing Synchro-Recording a CD to CD-R or CD-RW Synchro-Recording a CD to CD-R or CD-RW You can easily make digital recordings from a CD to a CD-R or CD-RW. Before recording, see “Notes on Recording” on page 16. To record a CD at high speed, see page 19. There are 2 types of recording. Each recording type can be selected both in normal speed Synchro-Recording and High-Speed Synchro- Recording (page 19). Normal Synchro-Recording (NORM SYNC) • After recording, you must finalize the disc. Until the disc is properly finalized, it cannot be played on any other machine. See “Finalizing a CD-R or CD-RW” on page 24. • A CD text contained in the disc is not automatically recorded on the disc. To label tracks/discs, see “Labeling Tracks/Discs” (page 26). Tip You can perform Synchro-Recording in the programmed order (page 15). Make-Disc Synchro-Recording (MAKE DISC) Records a CD in the original order of its track number regardless of the selected play mode, and finalizes the disc. Be sure to use the disc that has not been recorded. (“Blank Disc” appears in the display when you put the disc in DECK B.) • A CD text (if contained in the disc) is automatically recorded. (Note that “Text Save” in Setup Menu is set to “On.” ) You can enter the disc name or track name (up to 70 characters each, and 40 tracks per disc). Tip When you do not want to record the CD text automatically, set “Text Save” in Setup Menu to “Off.” For details, see “Using the Setup Menu” (page 28). Depending on the CDs, the CD text is automatically recorded even if “Text Save” in Setup Menu is set to “Off.” Notes • You cannot pause recording in Synchro-Recording. • If Repeat Play has been set, it is automatically canceled. • If you start the recording when Shuffle play is set, Shuffle play is automatically canceled. • Silent Pause and SBM functions do not work during Synchro-Recording. • The recording level is set to 0.0 dB regardless of the Setup Menu setting. • When copying a disc digitally recorded under control of the Serial Copy Management System (SCMS), the unit automatically select the analog recording. High speed recording changes to normal speed recording. For detailed explanation on SCMS, refer to the “Notes” on page 20. • When copying a commercial music CD contains copy protection code, the unit automatically select the analog recording. High speed recording changes to normal speed recording. • You cannot stop recording during finalizing in Make-Disc Synchro-Recording. Normal speed Synchro- Recording The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. When using the remote, set SELECT to CDR. DISC 1-5 A POWER (OPEN/CLOSE for RCD-W10) OPEN/CLOSE CD SYNCHRO NORMAL xH SELECT CD SYNCHRO NORMAL H x 1 Press POWER. 2 Press OPEN/CLOSE of DECK B and place a recordable CD-R or CD-RW on the disc tray. Press OPEN/CLOSE of DECK B again to close the disc tray. With the label side up “TOC Reading” appears. The unit starts to read the TOC (Table of Contents) data and shows the type of the disc on the deck in the display. 3 Press OPEN/CLOSE of DECK A (one of the DISC 1-5 A buttons for RCD-W50C) and place a CD on the disc tray. Press OPEN/CLOSE (or A) of DECK A again to close the disc tray. When you perform Normal Synchro- Recording (NORM SYNC), you can choose the disc which you want to record, and the play mode. When you perform Make-Disc Synchro- Recording (MAKE DISC), the disc in DECK A is used to record. 4 Press CD SYNCHRO NORMAL repeatedly to select the recording type, “NORM SYNC” or “MAKE DISC.” DECK B stands by for recording, and DECK A stands by for playing.* When you place a CD-R or CD-RW in the deck, the unit optimizes itself for the best possible recording and “OPC” appears on the display shortly. When “Not Blank” appears, make sure that the blank disc is placed correctly. * The unit stands by for recording immediately by pressing YES. While “OPC” appears, you cannot press YES. 5 After “New Track” appears in the display, press H (or X) of DECK B to start recording. Synchro-Recording starts. DECK A and DECK B will automatically stop after recording. To stop recording Press x. High-Speed Synchro-Recording You can easily make digital recordings from a CD to a CD-R or CD-RW, faster than normal speed Synchro-Recording. You cannot monitor the recorded signal while recording. When using the remote, set SELECT to CDR. Recording/Editing CD SYNCHRO HIGH xH SELECT CD SYNCHRO HIGH H x 1 Do Steps 1 to ...
Эта инструкция также подходит к моделям:CD-проигрыватели - RCD-W10 (492.74 kb)