Оценок - 6, средний балл: 3.2
(
)
)
|
Фрагмент инструкции
1 Disc/Track Title : Disc and track titles 2 Disc/Track Artist : Singer (or performer) 3 Disc/Track Songwriter : Songwriter 4 Disc/Track Composer : Composer 5 Disc/Track Arranger : Arranger 6 Disc/Track Message : Message from sponsor or artist 7 ID INFO. : Record company, release date, etc. 8 Genre INFO. : Genre information OItems from 1 to 6 are displayed in the sequence of disc and track. OWhen there is no text information to be displayed “– – – – –” is scrolled on the display. OIn the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will appear for approx. 3 seconds. To end ALL INFORMATION during display Press the MODE key. Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) Use the following procedure to select desired tracks (up to 32 tracks) from up to 200 discs and program them in the desired order. Preparation OLoad discs into the carousel. 0 OSet the CD player to stop mode. : Keys and controls used in the operations described on this page. 1 1 Press so that the PGM indicator lights. CHARACTER/ P.MODE 2 2 Select the disc. SET ° DISC SKIP 5 Previous disc Next disc Within 8 seconds! 1Select the disc number. 2Set the input. Go to step 3 within 8 sec. 3Select the track number. ABC 2 DEF 3 JKL 5 GHI 4 MNO 6 1 TUV 8 PRS 7 WXY 9 QZ 0 & ( ) – / +100 ' , : ? ! +10 SET 1Input the track number. Within 8 seconds! 2Set the input. 4Start playback. 6 GPMESELTCDSIC GP0M12D00 OThe disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP keys. OWhen the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected while looking at the recorded contents. “Registration of Title Name” ) OIf you make a mistake, press the CLEAR key and enter the disc No. from the beginning. ODisc numbers which do not contain discs can be selected, but they are canceled at the time of playback. Press the numeric keys in the following order... Track No.8 : 8 Track No.14 : 14 Track No.20 : 2) GP0M12D00T1--C OTo program the entire disc, press the SET key without inputting the track number. “ALL” will be displayed. OProgram other tracks in the desired order by repeating steps 2 and 3. OUp to 32 tracks can be programmed. “FULL” is displayed when no more tracks can be programmed. OIf you make a mistake, press the CLEAR key and restart from step 2. OTracks will be played in the order they were programmed (in order of P Nos.). OWhen the 4 or . key is pressed during playback, the track will be skipped in the direction of the pressed button. Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) 17 : Keys and controls used in the operations described on this page. To check the programmed tracks SPACE/ CHECK GP0M1D0200T3 OEach time the key is pressed, the program No. (P-NO) and the disc No. are displayed. OThe previous display resumes in a few seconds. To add a track to the program 1Set the CD player to stop mode. 2Perform steps 2 and 3 of “Program- ming tracks in desired order”.^ OWhen a track No. is entered, the track will be added to the end of the existing program. To change a track in the program SPACE/ CHECK 1Set the CD player to stop mode. 2Press the CHECK key. 3Perform steps 2 and 3 of “Program- ming tracks in desired order”.^ OPress the CHECK key repeatedly until the track No, to be changed is displayed. GP0M1D0200T3 Example OPress it while the “PGM01” indicator blinks. OThe track being played cannot be changed. To clear tracks from the program DELETE/ CLEAR To clear tracks from the end OEach time the key is pressed, the last track in the program is cleared. OThe tracks which are programmed earlier than the track being played cannot be cleared. CHARACTER/ P.MODE To clear all tracks OWhen the P.MODE key is pressed during playback, playback in order of tracks starts from the track being played. Repeated playback (REPEAT mode) CD-224M/DPF-J5010 (En) Preparation OLoad discs into the carousel. 0 To repeat only the desired tracks REPEAT 6 1Program the desired tracks by per- forming steps 1 to 3 of “Program- ming tracks in desired order”. ^ 2Switch REPEAT ON. 3Start playback. To repeat one selected disc REPEAT 6 ° DISC SKIP 5 1Check that the unit is in the normal play TRACK mode. # 3Start playback. Previous disc Next disc Within 8 seconds! 2Select the disc number. 4Switch REPEAT ON. : Keys and controls used in the operations described on this page. OUp to 32 tracks can be programmed by repeating steps 1. EREPTAON OThe current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa). OAll of the programmed tracks will be repeated. OIn case only one track is programmed, only that track will be repeated. To cancel repeated playback Press the REPEAT key twice. (REPEAT ON ® OFF) OThe disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP ke...
Эта инструкция также подходит к моделям:CD-проигрыватели - CD-224M (787.22 kb)