Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
If this is not true, the kind of recorder concerned will be written in the text. 4.1. Mode key Choice of the functioning mode of the recorder: . DIRECT mode: real-time paper-printing of the measured signals (ESCORT 3008B only) -use: immediate writing on paper, long-term slow acquisition -possibilities: complex triggering of the writing, action after the end of the writing, simultaneous recording in internal memory or on a file . MEMORY mode: fast acquisition in internal memory of the measured signals -use: short-term fast acquisition (transitory) -possibilities: complex triggering of the writing, action after the end of the writing, simultaneous recording on file . FRAME mode: fast acquisition in internal memory of the measured signals -use: short-term fast acquisition (transitory) for capture of non repetitive events -possibilities: complex triggering, particularly on overrun of a pre-recorded frame from a channel, action after the end of the writing, simultaneous recording on file . FILE mode: fast acquisition on internal hard disk or USB key of the measured signals -use: long-term fast acquisition (only limited by the size of the memory) -possibilities: complex triggering, action after the end of the writing, very big amount of data of acquisition Page 1 Use 4.2. Help key Displays a help window or the user s notice. After pressing Help , pressing any other key will display the help associated with it. Press the Help key again to exit. If a mouse is connected to the recorder, you can also display the user s notice (requires an integrated PDF-reader, cannot be used without a mouse). Page 2 4 Use 4.3. Set up key General configuration of the appliance, control of the alarm outputs, TCP/IP network address, calibration of the channels, updating of the internal software. . Language: choice of the language used by the appliance . Screen shut-off: turns off the back-lighting of the LCD screen, adjustment of the delay . Configuration: initialisation of the appliance in its default configuration, saving / loading in internal ROM memory, on internal hard disk or USB key, thermal paper printing ATTENTION: you will loose the current configuration . Alarm A: use of the A alarm output (relay contact) -Without: no condition is controlling the contact; it remains always open -Trigger: control by association of the analogical or logical channels on several thresholds (cf. chapter Triggering) -Paper error: control by lack of paper or opening of the door of the printing block (ESCORT 3008B only) In any case, the contact is open if the condition is true. Page 3 Use . Alarm B: use of the B alarm output (logical 0-5V output) -Without: no condition is controlling the output; it remains always low (0V) -Trigger: control by association of the analogical or logical channels on several thresholds (cf. chapter Triggering) -Paper error: control by lack of paper or opening of the door of the printing block (ESCORT 3008B only) In any case, the output is low (0V) if the condition is true. . Alarm C: id. AlarmB . Date modification: setting the hour and date for the appliance . Ethernet: modification of the TCP/IP address and of the address mask . Position Max of bargraph: moving direction of the bargraph of each channel on the screen -Right: maximum value of the channel on the right -Left: maximum value of the channel on the left . Electrical adjustment: calibration of the offsets of the channels, return to the factory adjustments . Software update: updating of the internal software (see chapter Presentation) The window at the bottom of the screen shows: -The current TCP/IP address -The number of the current version of the internal software -The number of detected channels Page 4 4 Use 4.4. Chart key ESCORT 3008B recorder only. Definition of every characteristics of the paper printing. See chapter Direct mode for a description in details of the parameters on this page. Page 5 Use 4.5. Channels set up key Configuration of the channels. After pressing this key, select a module, then select a channel to access its parameters. 4.5.1. Analogical channels . Name: givea name to the channel (max. 26 characters) . Type: choice of the type of measure made on this input -voltage, intensity, frequency or thermocouple -direct or RMS -value of the shunt in intensity measurement -choice of the type in thermocouple, compensation, unit . Filter: positioning a filter at the inlet -10 kHz, 1 kHz, 100 Hz, 10 Hz for analogical filters -1 Hz, 10 s, 100 s or 1000 s for digital filters . Function: makes it possible to assign a mathematical calculation function to the considered channel -Without: no function. -Change unit: modifies the unit of the measures on the channel; you can then program a couple of dots X1, Y1 and X2, Y2 to achieve a scaling -Calculation: available mathematical functions, associated parameters and unit Page 6 4 Use . Range and Zero: setting the range and the zero of the channel The range is the measure that corresponds with the total width ...
Эта инструкция также подходит к моделям:CD-проигрыватели - ESCORT 3008B (1.98 mb)
CD-проигрыватели - ESCORT 3016B (1.98 mb)