Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI DL TO HDMI CONVERTER • The DVI DL to HDMI Converter has 2 switches per input (4 inputs are provided). The Master Switch will allow the use of the 10-bit and 12-bit color modes. Once the main switch is in the ON position, 10-bit or 12-bit color modes can be selected. Disable the Master Switch to turn off the extended color modes and enable 8-bit color depth. 2 FEATURES Features • Converts up to 4 proprietary DVI-DL signals (supporting 12bit color) to HDMI. • Selector switch that will enable/disable Deep Color • 10-bit and 12-bit Deep Color modes • LED link indicators to ensure that all connections are active Package Includes (1) DVI DL to HDMI Converter Unit (4) 6 Foot DVI DL Cable (M-M) (1) 24V DC Power Supply (2.5A each) (1) Pair of Rack Ears 3 Front Panel 1 2 3333 Back Panel PANEL LAYOUT 4 456 7 456 7456 74567 8 PANEL DESCRIPTIONS 1 Power LED Indicator This input indicator will become active once the included 24V DC power adapter has been properly connected to a power source. 2 Reset Button This button will reset the unit and force all input/outputs to re-initialize. 3 Active Link LED Indicator This LED indicator will activate once a link has been detected from the source device to the output device. 4 10-Bit/12-Bit Selector Switch This switch will set either the 10-bit or 12-bit color modes. This switch is only active when the Main Switch is in the ON position. 5 Master Switch This switch will enable/disable the use of the extended color modes switch; 10-Bit/12-Bit Selector Switch 6 HDMI Output This port will accept a single HDMI capable output device via an HDMI type A connector. 7 DVI-DL Input This port will accept a single DVI-DL (proprietary signal) input device via a DVI-I type connector. 8 24V DC Power Input This input will accept power from the included 24V DC power supply. Connect the power supply to the unit and an available power source. 5 CONNECTING AND OPERATING THE DVI DL TO HDMI CONVERTER How to Connect the DVI DL to HDMI Converter 1. Connect up to 4 DVI dual link source devices to the DVI DL to HDMI Converter’s DVI inputs. 4 DVI DL cables are supplied. 2. Connect up to 4 HDMI capable displays to the DVI DL to HDMI Converter’s HDMI outputs. 4 HDMI cables are supplied. 3. Connect the supplied 24V DC power supply to the DVI DL to HDMI Converter. Plug the power cable into a power source. How to Operate the DVI DL to HDMI Converter Once all input and output devices are connected and power has been applied, the DVI DL to HDMI Converter should be on. Once the source devices and output devices are properly linked, the front panel LED’s should become active. The rear panel carries sets of switches to enable 10-bit and 12-bit deep color. A Master Switch must be enabled per input to activate these extended color modes. When the master switch is in the OFF position, 8-bit color is enabled. To use 10-bit and 12-bit color modes, please set the Master Switch to the ON position. This must be done for each input that will use the extended color modes. Once the Master Switch is set to ON, use the 10-bit/12-bit selector switch to enable the desired color mode. Changes are immediate and do not require a system reset. If a reset is required, please press the RESET button located on the front panel. 6 SPECIFICATIONS Video Amplifier Bandwidth ....................................................................... 225 MHz Maximum Resolution ......................................... 1080p (HDTV) / 1920x1200 (PC) Maximum Color Depth ......................................................................... 12-bit 4:4:4 Input Video Signal .............................................................................. 1.2 Volts p-p Input DDC Signal ......................................................................... 5 Volts p-p (TTL) Rack mountable .............................................................................. 1U rack space DVI Connector ................................................... DVI-I 29 Pin Female (digital only) Power Supply ........................................................................ 24V DC (2.6A each) Power Consumption ....................................................................... 60 Watts (max) Dimensions ............................................................... 17.25” W x 1.75” H x 4.75” D Shipping Weight ......................................................................................... 9.0 lbs. 7 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Equipment that fails under conditions other than those covered will be repaired at the current pri...