Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
• Remove a vacant 5.25” drive bay panel from the computer. Slide the drive into the drive bay. Set the jumper on the rear of the drive as necessary. A. When using a Primary IDE port If you need to connect your drive to the same primary IDE channel as the hard drive, the drive should be set to SLAVE position. B. When using a Secondary IDE port . If there is no device connected to the secondary IDE channel, connect the drive to this channel and set the jumper to MASTER. . When two drives are connected, set one drive to MASTER and the other drive to SLAVE. If your operating system encounters interface problems after installing the new drive, try swapping the jumpers or move one drive to another IDE channel. Installing the Drive Method A Method B DIGITALANALOG INTERFACEPOWER D RCSM SLA GLG 39 1 +5+12GND 40 2 AUDIOAUDIO CD Rewriter/DVD-ROM Drive CD Rewriter/DVD-ROM Drive DIGITALANALOG INTERFACE POWER DRCS M SLA GLG 39 1 +5+12GND 40 2 AUDIOAUDIO CD Rewriter/DVD-ROM Drive DIGITALANALOG INTERFACEPOWER D RCSM SLA GLG 39 1 +5+12GND 40 2 AUDIOAUDIO DIGITALANALOG INTERFACEPOWER D RCSM SLA GLG 39 1 +5+12GND 40 2 AUDIOAUDIO First Drive Second Drive CD Rewriter/DVD-ROM Drive CD Rewriter/DVD-ROM Drive Connect the audio cable/IDE data cable/DC power cable to the drive. . Connect the audio cable (if applicable) to the drive and then to the computer’s audio connection, located on the sound card or the mother board. This connection is normally not required. . Connect the IDE data cable to the back of the drive. . Connect a 4-pin power supply cable from the computer to the drive. Replace the cover, connect the power cord and restart your computer. • Your computer configuration may different from the illustrations. . Audio Cable Sound Card Marking L-R . IDE Cable . DC Power Cable Connect the audio cable/IDE data cable/DC power cable to the drive. . Connect the audio cable (if applicable) to the drive and then to the computer’s audio connection, located on the sound card or the mother board. This connection is normally not required. . Connect the IDE data cable to the back of the drive. . Connect a 4-pin power supply cable from the computer to the drive. Replace the cover, connect the power cord and restart your computer. • Your computer configuration may different from the illustrations. . Audio Cable Sound Card Marking L-R . IDE Cable . DC Power Cable Quick Set-up Guide CD Rewriter/DVD-ROM Drive GCC-H21N Quick Set-up Guide CD Rewriter/DVD-ROM Drive GCC-H21N To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive, please refer to the CD manual. Features System Environment • Enhanced-IDE (ATAPI) interface. Computer • Power tray loading and ejection of disc. (The disc can also be This unit can be operated in the system environment explained here. ejected manually.) • Combination CD-R/RW and DVD-ROM Drive functions into one drive. • Supports Region playback control Phase II. • Supports Windows 98, 2000, ME & XP/NT4.0. • Supports Mt. Rainier. • Supports DVD-RAM disc read. • Automatic buffer underrun error prevention technology- SuperLink • 52X max Writing (CD-R), 32X max ReWriting (CD-RW), 16X max Reading (DVD-ROM), and 52X max Reading (CD-ROM)*. *Writing speed depends on capabilities of discs. As a result, for ultra speed write/rewrite, you should use media labelled Ultra Speed Write/ReWritable discs Package Items System requirements CPU 350MHz (or faster) Pentium (for high speed, 500MHz or faster recommended) Memory 64MB or greater(128MB or over recommended) Hard disk 75MB or more free space. (The free space needed for writing depends on the quantity of data.) Interface Enhanced-IDE interface (as Primary Slave, Secondary Master or Slave) Drive bay 5.25-inch half-height bay required Power +5V/+12V power socket required Software Required OS Windows 98/2000/ME/XP or later* CD-R, CD-RW discs CD-R : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden, Ritek, MBI, SKC discs are recommended. CD-RW : Ricoh, Mitsubishi Kagaku Media, Verbatim, Imation, Sony discs are recommended. Item Quantity - Internal CD Rewriter/DVD-ROM Drive - CD Recording Software (with Power DVD) - E-IDE (ATAPI) cable - Mounting Screws - Quick Set-up Guide for CD Rewriter/DVD-ROM Drive 1 1 1 4 1 Specifications . The drive’s appearance and specifications may change without prior notice. Software Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent possible compatibility issues. Once you have installed the application software, you may (if you wish) begin to reinstall previous software, taking note for errors. Worldwide support ; Worldwide corporate site : Please visit and install the program, “LG ODD Online F/W update.” By using the program, you can automatically check the latest information about Firm...