Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
HDD (Choose the MA jumper) (Choose the SL jumper) SEC 1 PRI1 Motherboard +12V DC Ground Ground +5V DC Installing the ENGLISH 3 Installing a jumper on the master/ Connect a jumper to the rear side If the jumper is connected to MA (Master), If the jumper is connected to SL (Slave), If the jumper is connected to CS (CSEL), you the host interface signal CSEL. (In general, connection ) CS : Cable Select(CSEL) SL : Slave MA: Master 4 Connecting the audio cable from a sound card Connect the 4-pin audio cable between the sound output terminal on the CD-R/RW drive and the audio input terminal on the sound card. For clearer sound, use a digital output terminal. (Available only for the CAID that supports digital output) This may not be available for general sound cards. Sound Card Sound Output Terminal Digital Output Terminal Audio Input Terminal of the Sound Card To record data on a CD-R or CD-install the CD record utility. For compatibility uninstall any existing software of the 1 Insert the disc supplied with the CD-R/RW 2 Follow the instructions displayed on the screen to Refer to the separate utility documentation for further 3 Store the utility disc in a safe place. Installing the Device Driver No additional device driver is needed for Windows 95/98/2000/ME/XP/NT4.0, as the default Windows device driver is used. You can check that the CD-R/RW drive has been correctly detected by Windows. To do so, proceed as follows. 1 Double-click on the My Computer icon on your desktop. 2 Double-click on the Control Panel folder. 3 Double-click on the System icon. 4 Click on the Device Manager tab. 5 Expand the CD-ROM branch. The SAMSUNG CD-R/RW SW - *** device name is displayed. The SAMSUNG device driver enables discs in the CD-R/RW drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver folder on the CD record utility disc. 89 Setting Up the Automatic Setup 1 Insert the setup diskette in the diskette where A: is the diskette drive. To do so, type A: after the C:\ prompt and press [Enter] . 2 Type CDSETUP and press [Enter] . 3 Reboot the computer. Manual Setup 1 Make the C:\SAMSUNG directory. 2 Copy the files from the diskette to the C:\SAMSUNG directory. To do so, type COPY A: * . * C:\SAMSUNG after the C:\prompt and press [Enter] . 3 Edit the CONFIG.SYS file. Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry. LAST DRIVE = Z - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -DEVICE = C :\SAMSUNG\SSCDROM.SYS/D : SSCD000/V 4 Edit the AUTOEXEC.BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -C :\SAMSUNG\MSCDEX /D:SSCD000 5 Reboot the computer. 10 Using the CD-Drive To play audio or video CDs in 1 Push the power button and boot the 2 After booting the computer, open the disc compartment by pressing the Eject button. 3 Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. 4 Play the disc (CD). Playing Audio CDs Run the CD player supplied with Windows or your sound card. You can listen to the CD by connecting headphones to the appropriate connector. If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel. If you select DIGITAL at CD Audio Play in Media Player of Windows ME, the earphone does not appear in the Digital Mode. Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. 1 Do not place a disc in direct sunlight. 2 Store a disc vertically in a well-ventilated and stable location. 3 Do not write or attach a label on a disc. 4 Do not drop a disc or place heavy objects on it. 5 Do not touch the surface of a disc; hold it by the edges. 6 To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. 7 Do not leave the disc compartment open when you are not using it. 11 ENGLISH Solving Recording If you have any problems recording follow the appropriate instructions Hard Drive 1 Check whether the source file is corrupted. 2 Optimize the hard disk by using the Windows defragmenter START / PROGRAMS / ACCESSORIES / SYSTEM TOOLS 3 Decompress the hard disk if it is compressed. 4 Make sure that the space available on the hard disk is at least size of the largest file to be recorded on the disc. 5 If you wish to record more than 1000 small files: First create an image file and copy the image file to the disc. Choose the low record speed Compress small files and then record them Network Drive 1 Copy the network drive contents to the hard disk and then from the hard disk to the CD-R/RW drive. CD-ROM Drive 1 ...