Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Sony, модель BDV-E880

Производитель: Sony
Размер: 2.51 mb
Название файла: BDVE580_980_880_T58.pdf
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. 1 Set [Test Tone] to [On]. 2 Press X/x to select [Level], then press . 3 Press X/x to select the desired speaker type, then press . 4 Press C/c to select the left or right speaker, then press X/x to adjust the level. 5 Press . 6 Repeat Steps 3 to 5. 7 Press RETURN. The system returns to the previous display. 8 Press X/x to select [Test Tone], then press . 9 Press X/x to select [Off], then press . • The test tone signals are not output from the HDMI (OUT) jack. • To adjust the volume of all the speakers at one time, press VOL +/–. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes. Press SLEEP. Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes. When you set the sleep timer, the remaining time appears every 5 minutes. When the remaining time is less than 2 minutes, “SLEEP” flashes in the front panel display. To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP repeatedly to select the desired time. 50US Deactivating the Buttons on the Unit Deactivating the Buttons on the Unit You can deactivate the buttons on the unit (except for "/1) for preventing misoperation, such as child mischief (child lock function). Press x on the unit for more than 5 seconds. “LOCKED” appears in the front panel display. The child lock function is activated and the buttons on the unit are locked. (You can operate the system by using the remote.) To cancel, press x for more than 5 seconds so that “UNLOCK” appears in the front panel display. • When you operate the buttons on the unit while the child lock function is on, “LOCKED” flashes in the front panel display. Controlling Your TV with the Supplied Remote By adjusting the remote signal, you can control your TV with the supplied remote. • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. Preparing the remote for controlling the TV Press and hold TV "/1 while entering your TV’s manufacturer’s code (see the table) using the number buttons. Then release TV "/1. If the setting is unsuccessful, the currently registered code is not changed. Re-enter the code number. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the code that works with your TV. Manufacturer Code number SONY 01 (default) LG 02 PANASONIC 05 SAMSUNG 02, 06 SHARP 03 TOSHIBA 04 VIZIO 07 Changing the Brightness of the Front Panel Display Press DIMMER. Each time you press DIMMER, the brightness of the front panel display is changed. Saving Power in Standby Mode Check that the following settings are both made: – [Control for HDMI] in [HDMI Settings] is set to [Off] (page 61). – [Quick Start Mode] is set to [Off] (page 62). Other Operations 51US Browsing Websites Browsing Websites 1 Prepare for Internet browsing. Connect the system to a network (page 27). 2 Press HOME. The home menu appears on the TV screen. 3 Press C/c to select [Network]. 4 Press X/x to select [Internet Browser], then press . The [Internet Browser] display appears. • Some websites may not display correctly, or not function. To enter a URL Select [URL entry] from the options menu. Enter the URL using the software keyboard, then select [Enter]. To set the default start page While the page you want to set is displayed, select [Set as start page] from the options menu. To quit Internet Browser Press HOME. Internet Browser display You can check website information by pressing DISPLAY. The display information differs depending on the website and page status. A Page title B Cursor Move by pressing C/X/x/c. Place the cursor on the link you want to view, then press . The linked website is displayed. C Page address D SSL icon Appears when the linked URL is secured. E Signal strength indicator Appears when the system is connected to a wireless network. F Progress bar/Loading icon Appears when the page is being read, or during file download/transfer. G Text input field Press , then choose [Input] from the options menu to open the software keyboard. H Scroll bar Press C/X/x/c to move the page display left, up, down, or right. Available options Various settings and operations are available by pressing OPTIONS. The available items differ depending on the situation. Items Details [Browser Setup] Displays the Internet Browser settings. • [Zoom]: Increases or decreases the size of the displayed contents. • [JavaScript Setup]: Sets whether to enable or disable JavaScript. • [Cookie Setup]: Sets whether or not to accept browser cookies. • [SSL Alarm Display]: Sets whether to enable or disable SSL. [Input] Displays the software keyboard to enter characters while ...

Эта инструкция также подходит к моделям:
Blu-Ray проигрыватели - BDV-T58 (2.51 mb)
Blu-Ray проигрыватели - BDV-E980 (2.51 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории