Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
For liquids, the closure/funnel may be left in place and the liquids can be added by pouring them into the closure/ funnel, see figure 8b. 14 Figure 8. Example of Use of Blender To familiarize you with the operation of the blender, a sample recipe for mayonnaise is provided below: Mayonnaise Recipe 1 whole egg 1/3 cup of vegetable oil 2 tablespoons lemon juice or light vinegar 1 teaspoon sugar 1/2 teaspoon dry mustard 1/2 teaspoon of salt 2/3 cup of vegetable oil Mix all ingredients, except final 2/3’s cup of oil, for a few seconds at speed 1, then quickly pour the oil in through the opening in the cover in a uniformly thick stream, as shown in figure 8b. Operate the blender at speeds 1 or 4 until mixture is thick and smooth (approximately 10–20 seconds). Makes 1 1/4 cups. Tips: The blender should be operated with careful consideration as to what is required and/or desired. The speed at which the blender is operated and the length of operation for a given job will depend upon the degree of fineness desired or the amount being blended. When the blender is being used on dry materials, such as nuts or bread, the best results will be obtained when the blender jar is filled with approximately 1/2 cup of material to be blended. If the blender does not start (even after trying the highest speed), the blade has become blocked by the contents. The power unit should be: 1. Switched to off, “O/Off,” and unplugged. 2. The mixture should be removed and the contents at the bottom of the jar loosened. Removing Contents Before beginning to remove the contents from the blender, make sure that the power unit has been turned to off position “O/Off.” Remove the blender from the power unit by turning the blender clockwise while lifting. With the blender removed from the power unit, the contents of the blender may now be poured into a suitable container or bowl, as desired. Replace the cover on the high- speed drive. Care and Cleaning of Blender All components of the blender, except the blade/base assembly, are dishwasher safe. It is recommended that the blade/base assembly be cleaned only under flowing water rather than in the dishwasher. Soap and detergent will tend to wash out the bearing lubricant of the blade/base assembly. Do not use scouring cleaners on any of the blender parts. The power unit of the kitchen machine should be cleaned with a clean, damp cloth only. Never use coarse or caustic cleaning products to clean this appliance. Never immerse the power unit in water. 15 Continuous Shredder (MUZ 4 DS2) WARNING 1. Blades on discs are sharp. Handle carefully. Do not grip the discs by the blades. 2. When operating continuous shredder, keep hands clear of filling and discharge tubes. Only work with pusher. 3. The continuous shredder must be completely assembled before placing on the power unit. 4. Always operate the continuous shredder fully assembled and with cover in place. The MUM 4635 UC and the MUM 4420 UC Bosch Compact Series Kitchen Machines include the MUZ 4 DS2 continuous shredder attachment. The continuous shredder attachment consists of, figure 9: Figure 9. a. Cover closure/pusher b. Cover c. 3 slicer/shredder discs: • reversible slicing disc • reversible shredding disc • grating disc d. disc holder/slinger e. Housing Continuous shredder, intended use The continuous shredder attachment has been designed for slicing, shredding and/ or grating of vegetables, as well slicing/ shredding of soft cheeses and sausages or meat and grating of vegetables and hard cheese. Use of Slicer/Shredder Before beginning to use this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to Off position, “O/Off,” and that you have removed the motor drive cover. 1. Before using the continuous shredder for the first time, it is recommended that the cover closure/pusher, cover, discs, disc holder/slinger and housing be washed. All components of the continuous shredder are dishwasher safe. After washing, rinse well and dry before using. WARNING The blades on the discs are very sharp. Handle with care. 2. The continuous shredder is used in mode 2, see table 1. To place the continuous shredded on the power unit, the arm must be rotated to the horizontal position. Depress the release button, see 4a, and move the arm as necessary so that the arm is horizontal. If you have not already done so, remove the motor drive cover from the mid- speed drive, as shown in figure 10. 16 Figure 10. Assemble the continuous shredder in the order as shown in figure 9: 1. Insert the disc holder/slinger into the housing. 2. Select disc to be used and, making sure that the side desired is facing upward, place it on disc holder. 3. Place cover on housing and turn counterclockwise until cover snaps into place and arrows are aligned, see figure 11. 4. The continuous shredder is now assembled. 5. Place bowl on the power unit. Depress the release button and raise arm so that the bowl can be placed in position...
Эта инструкция также подходит к моделям:Блендеры - MUM 4620 UC (2.8 mb)
Блендеры - MUM 4420 UC (2.8 mb)