|
Фрагмент инструкции
See SPECIAL ACCESSORIES at the back of this booklet, page 23. Or, to view all currently available accessories, visit our Web site at Work on expanding the usefulness of the Bosch Compact Series Kitchen Machine is a continuing process. If there is some type of accessory in which you are interested in that you cannot find at the back of the book or on our Web site, please either write us at: • Bosch Small Appliances Customer Support BSH Home Appliances 5551 McFadden Avenue Huntington Beach, CA 92649 or call us at: • 1 (866) 44BOSCH [1 (866) 442-6724] Power Unit Features Motor The MUM 4405 and MUM 4420 have a 400watt motor while the MUM 4620 and MUM 4635 have a 450-watt motor, the most powerful motor offered with any compact household kitchen machine. All MUM Compact Series power units have the following features, refer to figure 2: Electronic speed control Six-position rotary switch is located at the side of the multifunction arm of the power unit: 4 speeds plus a locking park position “P” and a stop position “O/Off,” see figure 2a. Three accessory drives Three drives: • A high-speed drive used for blender and other attachments requiring high- shaft speed • A mid-speed drive used for continuous shredder attachment and other attachments requiring mid-range shaft speeds and • A high torque drive used for whisks, dough hook and meat grinder attachment and other attachments requiring more torque. Each of these drives is controlled by the 4speed electronic control providing 12 distinct shaft speeds optimizing the motor speed for different loads encountered by different attachments. Ergonomic multifunction arm Four locking positions place attachments in most ergonomic position for their use. Park position “P” Six-position rotary switch, located at side of the multifunction arm of the power unit, has “P” position used to “park” the drive unit. The drives must be placed in the park position prior to changing position of ergonomic multifunction arm. If drives are 6 not in proper position for rotating the arm turning the rotary switch to the “P” position will cause motor to reposition drives. If motor does not reposition drives when turned to the “P” position, the drives are already in position for arm to be rotated. Motor drive covers Two covers are provided to cover high -speed and mid-speed drive when they are not in use, see figure 2c. Convenient cord storage The MUM 4405 and MUM 4420 have convenient cord storage located on the back of the power unit, where the cord may be wound around the holder, see 2d. The MUM 4620 and the MUM 4635 have internal cord storage. To store the cord or reduce the length of the cord with these two units, simply pull on the cord and let the cord be retracted into the base of the machine, see figure 2. Four rubber feet Four rubber feet will provide the stability, while also serving to isolate the power unit from the hard surface to minimize noise and vibration. Figure 2. 7 Getting Started The operation of your Bosch Compact Series Kitchen Machine is summarized below. Specific instructions for using each of the attachments, provided with the kitchen machine systems covered by this manual, follow the summarized instructions. Please read the specific instructions thoroughly before using that attachment, paying particular attention to the IMPORTANT SAFEGUARDS and WARNINGS provided. 1. Place power unit on suitable work surface. Before using the machine with any of the attachments, the power unit should be placed on a suitable work surface. The surface should be sturdy, smooth and clean; make sure that there is no flour or oil on the surface. A clean smooth surface will provide the best footing and will limit slipping and/or “walking.” 2. Plug power unit into power supply. Pull the electrical cord or unwind the electrical cord to appropriate length. Make sure power unit is turned to Off “O/Off” and plug it into a convenient nearby receptacle. Turn rotary knob to park “P” position to make sure the drives are in proper position to rotate arm and/or install attachment. If motor does not reposition drives when turned to “P” position, the drives were already in position for arm to be rotated. WARNING 1. Do not twist or attempt to push in the electrical cord. If the cord becomes jammed, pull out the cord to its full length and then allow it to slowly retract. 2. If the power should be interrupted, the power unit will remain on and will restart when power is restored. 3. Remove drive cover. Remove drive cover from drive to be used, if necessary, see figure 2c. 4. Select attachment to be used. Select attachment you wish to use. Reposition the ergonomic multifunction arm, if necessary (see figure 4a & 4b), and place attachment on power unit. The Bosch Compact Series Kitchen Machine uses its attachments in 6 modes. The various modes used (the drive and position of the arm) are shown in table 1. Table 1. See specific instructions for attachment selected. Specific instructions...
Эта инструкция также подходит к моделям:Блендеры - MUM 4620 UC (2.8 mb)
Блендеры - MUM 4635 UC (2.8 mb)