Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
This headset represents the state of the art in wireless headset design and is designed for reliable and trouble-free performance. US: RF-QX4 • Canada: RF-QX4-T • Europe: RF-QX4-E • Japan: RF-QX4-J Package contents • Quick Setup Guide • RF-QX4 headset • Ear loop • USB charging cable • Smalt medium and A/C walladapter and large ear buds Warning: If the volume is set too high, excessive sound pressure from earphones and Charging the battery Charge the headset before using. • Connect the charger to the headset and to a power outlet. While the battery is charging, the indicator lights red. When the battery is fully charged, the indicator lights yellow-green. Note: Charge the headset with the attached USB cable and provided wall charger only. Turning the headset on and off 1 To turn on the headset, press and hold the Power/Send/End button for about two seconds. The headset beeps and the indicator blinks green. 2 To turn off the headset, press and hold the Power/Send/End button for about four seconds. The headset beeps and the indicator briefly lights red. Pairing the headset 1 Press and hold the Power/Send/End button for about four seconds. The indicator rapidly flashes green. Make sure that a compatible phone is turned on and within 33 feet (10 meters) of the headset. 2 Release the button. The headset is now in pairing mode. 3 Activate the Bluetooth connection from the phone. See your phone's documentation for instructions. 4 Set the phone to start searching for Bluetooth devices. 5 Select RF-QX4 from the list of found devices. 6 If necessary, enter the PIN Code 0000 to pair and connect the headset with your phone. In some phones, you need to make a connection separately after pairing. To... Do this... Voice dial Press the Power/Send/End button. Redial Double-press the Power/Send/End button. Answer a call Press the Power/Send/End button. End a call Press and hold the Power/Send/End button for two seconds. Refuse a call Double-press the Power/Send/End button. Change the volume Press the + (volume up) or - (volume down) button. Transfer a call between connected devices Double-press the Power/Send/End button while in a call to transfer the call to the handset. QUICK SETUP GUIDE Erasing all pairing information When the headset is turned off, press and hold the Power/Send/End and - (volume down) buttons until the indicator flashes red and green alternately. Resetting the headset (hardware reset) To reset the headset (hardware reset): Press and hold the Power/Send/End button and connect the charger at the same time. The headset is turned off and reset. Note: You should only use the reset function when the headset operates unusually. For more information about using your headset, see the online User Guide. FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1 ) this device may not cause harmful interference, and (2) this device must accept...
Эта инструкция также подходит к моделям:Беспроводные гарнитуры и прочие аксессуары - RF-QX4-E (229.77 kb)
Беспроводные гарнитуры и прочие аксессуары - RF-QX4-J (229.77 kb)
Беспроводные гарнитуры и прочие аксессуары - RF-QX4-T (229.77 kb)