Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
Otherwise, make the connection in the phone’s Bluetooth menu as instructed in the user’s guide of the phone. Getting started Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your permission. In compatible Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. ¦ Troubleshooting If you cannot connect the headset to the compatible phone, proceed as follows: • Make sure that the Bluetooth feature is activated on the compatible phone. • Make sure that the headset is switched on and paired with the compatible phone. • Make sure that you have disconnected the previous Bluetooth connection from the phone. • Check that the headset is within 10 metres of the phone and that there are no obstructions, such as walls, or other electronic devices between the headset and the phone. • The pairing information list of the headset may be full. The headset can store the information of up to 8 phones at a time. If the list becomes full, reset the headset to the original settings, see Resetting the headset on page 16. • If the headset does not automatically reconnect to the default/last user, press and hold the answer/end key. English 11 Using the headset 3. Using the headset Note: The use of wireless devices may be restricted in some situations. Observe any restrictions and obey all signs and instructions concerning use of wireless devices. ¦ Switching the headset on or off To switch on the headset, press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking. The blinking continues for approximately 10 minutes or until the headset is connected to a compatible phone. If the headset cannot be connected to the phone during this time, the headset is switched off. To switch off the headset, press and hold the power key for 2 seconds, when no call is in progress. The headset beeps and the red indicator light is displayed briefly. Using the headset Carry the headset by attaching it to your clothing as shown in Figure 4 or wear it around your neck using the neck strap as shown in Figure 5. Using the headset When you don’t use the headset, you can wind the earphone wire around the headset as shown in Figure 6. ¦ Call functions When the headset is connected to the phone, make a call by using the phone in the normal way. Note that the call functions depend on the phone that you use. Answering and ending a call When you receive a call, you hear a ringing tone through the headset. Press the answer/end key to answer the call or to end the currently active call. You can also answer or end the call using the phone. English 13 Using the headset Automatic answer If, on the phone, the Automatic answer function is set to on, the phone automatically answers the incoming call after one ring. Rejecting a call When you receive an incoming call and you do not want to answer, briefly press the answer/end key twice. Redialling the last dialled number Press the answer/end key twice briefly when no call is in progress. Muting an ongoing call You can mute or unmute the ongoing call by pressing the power key briefly. Voice dialling When no call is in progress, press and hold the answer/end key until you hear a tone that indicates that you can say the desired name ("voice tag"). Say the voice tag. The phone plays the voice tag and dials the related phone number. You can also activate voice dialling with the phone. For details on voice dialling, see the phone’s user’s guide. Note that this function is only available if the phone supports voice dialling. ¦ Adjusting the earphone volume Press the volume up key to increase or the volume down key to decrease the volume. To adjust the volume quickly, press and hold either of these keys. Using the headset ¦ Switching the call between phone and headset You can switch the active call between the headset and all compatible phones. To switch the call from the headset to the phone and vice versa, press and hold the answer/end key or use the respective function in your phone. ¦ Using the headset with several paired phones Before the headset can be used, the compatible phone has to be paired with the headset. The headset can be paired with up to 8 compatible phones but connected to only one phone at a time. The phone that was first paired with the headset is called the "default phone". The phone that was last used with the headset is called the "last used phone". If the headset is switched on within 10 metres of several paired phones, the headset will try to connect to the "default phone" within a few seconds. If the headset cannot connect to the "default phone" (for example, it is switched off or its user rejects the connection), the headset tries to connect to the "last used phone" within a few seconds. If the headset cannot connect to either of the compatible phones, it remains discoverable for other phones for approximately 10 minutes...