(b) Handle held too high. Dulls quickly and will not cut smoothly. Backslope (a) File too large. —2J (b) Handle held too low. Cuts slowly and requires extra pressure. Depth Gauges j£=v-'/X Not filed down, too high Cuts slowly, requires extra pressure and leads to cutter damage. Depth Gauges too low. ^>3=^Too much filinq. (o^^o) y Rough cutting, requires more power (cuts too deep) 13 The delivery of oil to the bar and'chain is preset at the factory, and for normal use is unlikely to need al

Use a funnel when filling the tank and wipe up any spills. Do not let sawdust or other dirt enter the oil tank. The oil filler cap is located adjacent to the front handle. The cap must be tight to ensure proper operation of the oil pump. An automatic pump delivers oil to the barand chain whenever the chain saw is operated. When new and after the tank has been emptied, or after periods of disuse, it may be necessary to prime the pump. This is done by usingthe right handtocontinually runthe saw,

Keep saw chain sharp, oiled and properly tensioned for safest operation. Follow instructions for lubricating and changing accessories. For information about chain brake see pages 9, 10, & 11. DON’T FORCE THE CHAIN SAW TO CUT. It will do the job better and more safely at the rate for which it was designed. USE RIGHT TOOL. Never cut plastics, sheet metal or any non-wood substance. Don’t force a small chain saw to do the job of a heavy duty saw. CUT AT FULL SPEED ONLY. Always have chain moving a

These include: . Injuries caused by touching any rotating/moving parts. . Injuries caused when changing any parts, blades or accessories. . Injuries caused by prolonged use of a tool. When using any tool for prolonged periods make sure you take regular breaks. . Impairment of hearing. . Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF). 10 Use Switching on and off (fig. H) For your safety, this tool is equipped wit

Refer to “CHAIN TENSION ADJUSTMENT" for proper method of tensioning chain. • Retighten chain frequently during first two hours of use as chain breaks in. TTHANKHANK YOUYOU FORFOR CHOOSINGCHOOSING BBLACKLACK & D& DECKERECKER! G! GOO TTOO WWWWWW.B.BLACKANDLACKANDDDECKERECKER.. COMCOM/N/NEWEWOOWNERWNER TTOO REGISTERREGISTER YOURYOUR NEWNEW PRODUCTPRODUCT.. BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No.,

Retighten the two retention bolts (11) securely. Check that the correct tension has been set by lightly pulling on the chain. The tension is correct when the chain snaps back after being pulled 1/8” inch (3 mm) away from the guide bar. There should be no "sag" between the guide bar and chain on the underside. Note: Do not over tension the chain as this will lead to excessive wear and reduce the life of the bar and chain. It will also lead to reduced product performance. Note: With first use and

• DO NOT OVER-TENSION CHAIN. Refer to "ADJUSTING CHAIN TENSION" for proper method of tensioning chain. 18 Volt Cordless Chain Saw INSTRUCTION MANUAL • Retighten chain frequently during first two hours of use. Catalog Number CCS818 Thank you for choosing Black & Decker! to register your new product. PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON: If you have a question or experience a problem with your Black & Decker purchase, go to HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS for insta

. Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback. Safety recommendations for the chainsaw . We strongly recommend that first time users obtain practical instruction in the use of the chainsaw and protective equipment from an experienced user. Initial practice should be completed sawing logs on a saw horse or cradle. . We recommend that when carrying the chainsaw that you make sure that the brak

+40.C +10.C Charge only at ambient temperatures between 10°C and 40°C. The charger is intended for indoor use only. Your charger is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. Electrical safety Your charger is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. If the supply cord is damaged, it must be replaced by the

After approximately 1 hour of charging, the red charging indicator will go off and the green ‘end of charge’ indicator will come on. The battery is now fully charged. . Remove the battery (10) from the charger (23). Installing and removing the saw chain (fig. D - F & H) Always wear protective gloves when installing or removing the saw chain (8). The saw chain (8) is sharp and can cut you when it is not running. . Place the tool on a firm and stable surface. . Loosen the 2 Allen screws (14) using