Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Black & Decker, модель CCS818

Производитель: Black & Decker
Размер: 1.39 mb
Название файла: a43d79a3-85e8-4997-97f4-98eb618c6fa5.pdf
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


• DO NOT OVER-TENSION CHAIN. Refer to "ADJUSTING CHAIN TENSION" for proper method of tensioning chain. 18 Volt Cordless Chain Saw INSTRUCTION MANUAL • Retighten chain frequently during first two hours of use. Catalog Number CCS818 Thank you for choosing Black & Decker! to register your new product. PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON: If you have a question or experience a problem with your Black & Decker purchase, go to HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS for instant answers 24 hours a day. If you can’t find the answer or do not have access to the internet, call 1-800-544-6986 from 8 a. m. to 5 p. m. EST Mon. - - Fri. to speak with an agent. Please have the catalog number available when you call. SAVE THIS MANUAL FOR FUTURE REFERENCE. VEA EL ESPANOL EN LA CONTRAPORTADA. POUR LE FRANCAIS, VOIR LA COUVERTURE ARRIERE. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO YPOLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. 1 90560838 ccs818 chain 2/12/10 10:07 AM Page 2 Intended use Your Black & Decker Cordless Chain Saw applications and cutting small logs up to 8 diameter. This tool is intended for consumer use only. Chain saw names and terms • Bucking - The process of cross cutting a felled tree or log into lengths. • Motor Brake - A device used to stop the saw chain when the trigger is released. • Chain Saw Powerhead - A chain saw without the saw chain and guide bar. • Drive Sprocket or Sprocket - The toothed part that drives the saw chain. • Felling - The process of cutting down a tree. • Felling Back Cut - The final cut in a tree felling operation made on the opposite side of the tree from the notching cut. • Front Handle - The support handle located at or toward the front of the chain saw. • Front Hand Guard - A structural barrier between the front handle of a chain saw and the guide bar, typically located close to the hand position on the front handle and sometimes employed as an activating lever for a chain brake. • Guide Bar - A solid railed structure that supports and guides the saw chain. • Guide Bar Scabbard - Enclosure fitted over guide bar to prevent tooth contact when saw is not in use. • Kickback - The backward or upward motion, or both of the guide bar occurring when the saw chain near the nose of the top area of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. • Kickback, Pinch - The rapid pushback of the saw which can occur when the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar. • Kickback, Rotational - The rapid upward and backward motion of the saw which can occur when the moving saw chain near the upper portion of the tip of the guide bar contacts an object, such as a log or branch. • Limbing - Removing the branches from a fallen • Low-Kickback Chain - A chain that complies with the kickback performance requirements of ANSI B175.1-a representative sample of chain saws.) • Normal Cutting Position - Those positions assumed in performing the bucking and felling cuts. • Notching Undercut - A notch cut in a tree that directs the tree. s fall. • Oiler Control - A system for oiling the guide bar and saw chain. • Rear Handle - The support handle located at or toward the rear of the saw. • Reduced Kickback Guide Bar - A guide bar which has been demonstrated to reduce kickback significantly. • Replacement Saw Chain - A chain that complies with kickback performance requirements of ANSI B175.1-2000 when tested with specific chain saws. It may not meet the ANSI performance requirements when used with other saws. • Saw Chain - A loop of chain having cutting teeth, that cut the wood,and that is driven by the motor and is supported by the guide bar. • Ribbed Bumper - The ribs used when felling or bucking to pivot the saw and maintain position while sawing. • Switch - A device that when operated will complete or interrupt an electrical power circuit to the motor of the chain saw. • Switch Linkage - The mechanism that transmits motion from a trigger to the switch. • Switch Lockout - A movable stop that prevents the unintentional operation of the switch until manually actuated. Important Safety Instructions WARNING: When using a battery operated chain saw, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS. 2 90560838 ccs818 chain 2/12/10 10:07 AM Page 3 Safety Instructions and Warnings for Chain Saws • Keep Work Area Clean Cluttered areas invite injuries. Do not start have a clear work area, secure footing, and path from the falling tree. • Consider Work Area Environment Use extreme caution when cutting small size brush saplings because the slender material may catch the chain and be whipped toward you or pull you off balance. When cutting a limb that is under tension be alert for spring back you wi...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории