Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for 27851xx1 model) Make sure your package includes the items shown here. Factory Default This feature allows you to restore the unit’s original features. 1. Press the FLASH/program button until the screen displays DEFAULT. 2. Use the CID/VOL (left or right arrow) button to scroll to YES. The default setting is “NO”. 3. Press FLASH/program to confirm. You will hear a confirmation tone. Cordless Phone Basics Making a Call 1. Press the TALK/call back button and dial the desired number. -ORTo perform preview dial, dial the number first then press the TALK/call back button. 2. To hang up, press the TALK/call back button or place the handset in the cradle. Receiving a Call 1. To answer a call press the TALK/call back button on the handset before you begin speaking. 2. To hang up, press the TALK/call back button or place the handset in the cradle. Call Transfer (applicable only with Model 27851xx2) During an external call, you may transfer the call to another handset. 1. Press the answer/transfer button on originating handset. the screen displays TRANSFERRING. Both handsets will be paged. 2. Press the answer/transfer or TALK/call back button on the receiving handset to answer the call. NOTE: To cancel the call transfer, you may press the TONE*/exit or the answer/transfer button on the originating handset. Redial Press the REDIAL button to quickly dial the last number you called (up to 32 digits). If you get a busy signal, and want to keep dialing the number, press redial to dial the number again. In Use Indicator When the in use/charge indicator on the base is lit, the handset is either in use or charging. The in use/charge indicator on the base flashes when you receive a call. Flash If you subscribe to the combined Call Waiting Caller ID service from your local telephone company you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. To connect the waiting call, press the FLASH/program button on the handset and your original call is put on hold. You may switch back and forth between the two calls by pressing the FLASH/program button. TIP: Do not use the TALK/call back button to activate custom calling services such as call waiting, or you’ll hang up the phone. Volume When the phone is ON, press the CID/VOL (left or right arrow) on the handset to adjust the volume of the handset’s earpiece. There are four settings. Press the right arrow to increase the volume and left arrow to decrease the volume. You will see the volume setting on the handset display. VOL 4 is the maximum and VOL 1 is the minimum. Channel Button While talking on the phone, you might need to manually change the channel in order to reduce static caused by appliances, such as baby monitors, garage door openers, microwave ovens, or other cordless phones. Press and release the CHAN/delete button to move to the next clear channel. Temporary Tone This feature is useful only if you have pulse (rotary) service. Temporary Tone Dialing enables pulse (rotary) service phone users to access touchtone services offered by banks, credit card companies, etc. For example, when you call your bank you may need to enter your bank account number. Temporarily switching to touchtone mode allows you to send your number. 1. Dial the telephone number and wait for the line to connect. 2. When your call is answered, press the TONE*/exit button on the handset to temporarily change from pulse dialing to tone dialing. 3. Follow the automated instructions to get the information you need. 4. Hang up the handset and the phone automatically returns to pulse (rotary) dialing mode. Exit Press the TONE*/exit button to cancel any command you initiated. Ringer Switch The RINGER switch must be ON for the handset to ring during incoming calls. Paging the Handset This feature helps to locate a misplaced handset. Press the page button on the base. The handset will beep for about two minutes or until you press TALK/call back on the handset or press the page button on the base. Base Layout For Model 27851xx2 there will be ONE additional handset, charge cradle, battery pack and cover than shown above. IMPORTANT: You can only use one handset at a time and there is NO conference and intercom features for these units. Telephone Jack Requirements To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home. If you don’t have a modular jack, call your local phone company to find out how to get one installed Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized acc...