Read this manual carefully to fully explore the features and functions of your new Weather FXi forecaster. Automatically Updated 4-DAY Forecast As long as your PC is connected to the Internet, and the “4-Day Forecast” software is active (it can be left running in the background with minimal CPU usage, while you use your computer for other tasks), the weather forecast data displayed on the unit will be updated automatically and sent to the main unit wirelessly via the USB transmitter. The Forecas

The Slim Power Inverter converts power in two stages. The first stage is a DC-to-DC conversion process that raises the low voltage DC at the inverter input to 145 volts 2 DC. The second stage the high voltage DC into 115 volts, 60 Hz AC. The DC-to-DC converter stage uses creative, high zero voltage switching power conversion techniques found in less technologically advanced models.stage uses advanced power transistors in a full bridge configuration. Slim Power Inverter Output Waveform The AC out

It lets you provide two outlets for 115 Volts AC anywhere you have 12 volts DC; in your car, truck, RV or boat. It is designed to be easy to use and provide years of dependable service. IMPORTANT SAFETY NOTE Read all the Cautions and Warnings before installing and using the power inverter. The inverter must be properly installed. If you are not familiar with 12 volt, high-current wiring, it is recommended that you have a professional automotive installer install the inverter. Cautions • The STP-

iv) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately. v) NEVER smoke or allow a spark or flame in vicinity of battery or engine. vi) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part that may cause explosion. vii) Remove personal metal items such as rin

RVs and boats often experience severe shocks, while driving over potholes and rough road surfaces or while navigating in choppy seas. RVs and boats also experience constant vibration, from surface friction, drive engines and on-board generators. The RV1012UL and RV2012UL are engineered specifically to meet the challenges of demanding RV and marine environments—and are UL-tested to perform reliably under the most extreme shock and vibration conditions. The new RV1012UL and RV2012UL include all th

(2 gauge is recommended up to 6 feet. Over 6 feet 0 gauge.) 3. Do not use extension cords or multi-taps on the inverter. One device per outlet. 4. Supply plenty of fresh air. A hot inverter will not be able to supply full power and will shut down if it becomes too hot. It is best to mount it in a location that is cool, like the passenger cab, away from an outside wall, and not in a cargo box. 5. Mount/store in a dust free environment. A build up of dirt will keep the inverter from being able

Apply the parking brake to the vehicle 4. connected to the battery. Place the transmission in “Park” for an automatic transmission, or in “Neutral” for a manual transmission. Start the car engine. Attach the battery positive (red) termi5. nal first and then the negative (black) terminal. (When disconnecting, first remove the negative terminal then the positive terminal connection.) Turn on the Inverter’s Power Switch.6. The green Power LED of the Inverter will light up. Note: If the red Over-loa

• Adjustable wrench for fastening DC terminal bolts, • Two battery cables (copper, appropriately sized according to application) with connectors already crimped by the company or store where you purchased the cables, • Ground cable (copper, appropriately sized) for attaching to the ground chassis, • DC-rated fuses (and fuse holders), • Screwdriver (flathead and Philips), power screwdriver, or power drill for use in mounting the inverter, • Mounting screws (4) size #10. Basic Installation Steps 1

Model Powera Output Currentb Input Voltage Tempera ture PROwatt SW 600 540 W 4.5 A 13 Vdc Ambient 25 °C (77 °F) PROwatt SW 1000 900 W 7.5 A PROwatt SW 2000 1800 W 15 A a.Applies to resistive loads such as incandescent lights. b.Applies to reactive loads such as motors. Input Voltage The input voltage limits are shown in the following table. Peak Performance 13–14.5 V n/a Low Voltage Alarm Voltage is The audible low battery 11.0 V or less alarm sounds. Operating Condition Voltage Range Comment Lo