Оценок - 4, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Touch Panel Adjust Screen is displayed. (. Page 12) Exit the Setup Menu Screen Touch the [Return] button. • If you cannot select a setup menu item. Press the [MODE] button for at least 1 second, the touch panel position settings are reset to the factory defaults. Initializing the User Settings When the Setup menu is displayed, pressing the [V.SEL] button for 1 second or longer restores the factory set default values for individual items from those set by the user. 8 | English < System Setup > System Setup Screen-1 < System Setup > System Setup Screen-1 Setting the NAV input Setup input and switch method of the navigation picture. Touch Setting [7RGB] It becomes the RGB mode setting. Operate the V.SEL button when the image from the navigation unit connected to I/F terminal is shown on the monitor. [7AV-IN1] It becomes the AV-IN1 mode setting. Operate the V.SEL button when the image from the navigation unit connected to AV-IN1 terminal is shown on the monitor. [7Off ] It becomes the Off mode setting. Use this setting when there’s nothing connected to the I/F terminal. Setting the AV-IN1 input Setup switch method of the picture input to AV-IN 1 terminal. Touch Setting [7Video 1] It becomes the video mode setting. Operate the V.SEL button when the image from the device connected to AVIN1 terminal is shown on the monitor. [7NAV] It becomes the navigation mode setting. Operate the V.SEL button when the image from the navigation unit connected to AV-IN1 terminal is shown on the monitor. [7Off ] It becomes the Off mode setting. Use this setting when there’s nothing connected to the AV-IN1 terminal. Setting the AV-IN2 input Setup switch method of the picture input to AV-IN 2 terminal. Touch Setting [7Auto] It becomes the auto video mode setting. When the video signal input to the AV-IN2 terminal, the monitor image is switched to the image of the device connected to the AV-IN2 terminal. [7Manual] It becomes the video mode setting. Operate the V.SEL button when the image from the device connected to AVIN2 terminal is shown on the monitor. [7Off ] It becomes the Off mode setting. Use this setting when there’s nothing connected to the AV-IN2 terminal. English | 9 System Setup Screen-2 System Setup Screen-1 Select the AV-IN2 input display Selecting the display when this device is switched to internal AV-IN2 terminal input source. Touch the [Video 2] or [R-Cam] button. Setting the Rear view camera image [Mirror]: (AV-IN2 setting during "R-Cam") Touch Setting [7On] The image which appeares in the camera is turned left-side right and displayed. [7Off ] The image which appeares in the camera is displayed as it is. Touch Sensor Tone [BEEP] Setting the operation check sound (beep sound) ON/OFF. [7On] Touch sensor tone is turned on. [7Off ] Touch sensor tone is turned off. Touch Setting Switching the Setup Screen-2 Touch the [ 3 ] button. Exit the System Setup Screen-1 Touch the [Return] button. Return to the setup menu screen. Setting the AV Output [AV-OUT] Touch Setting [7Normal] Picture/sound with monitor picture. [7Video 1]/ Picture/sound from AV-IN1 [7NAV] terminal. [7Video 2]/ Picture/sound from AV-IN2 [7R-Cam] terminal. [7TV] Picture/sound from television. (During the KTC-V500N, KTC-V500P or KTC-V500E is connected) Switching the Setup Screen-1 Touch the [ 2 ] button. Exit the System Setup Screen-2 Touch the [Return] button. Return to the setup menu screen. 10 | English TV Area Setting Screen < TV Setup > Setup Function TV Area Setting Screen < TV Setup > Setup Function Setting the TV Area (During the KTC-V500E is connected) Select the area for TV broadcast viewing. Selecting the Preset Bands: Touch the [TV 1] or [TV 2] button. Selecting the Reception Area: Each time you touch the [ 2] or [ 3 ] button. Select the channel setting for your country as follows. Exit the TV Area Setting Screen Touch the [Return] button. Return to the Setup menu screen. • Pulling out the Connection cable to the TV tuner, settings of the TV Area will be default. Press the Reset button and set the TV Area again if the Connection cable is reconnected. G1 Austria, Denmark, Belgium, Finland, Germany, Iceland, Norway, Sweden, Switzerland, Netherlands, Spain, Portugal, Serbia and Montenegro PALB/ G G2 Albania, Italy PALB/ G G3 Ireland, United Kingdom PAL-I G4 France SECAM G5 Bulgaria, Czech, Hungary, Poland, Romania, Russia, Slovakia SECAM -D/K G6 Greece SECAM -B/G • The reception area can be set for two separate preset bands TV1 and TV2. English | 11 < Touch Panel Adjustment > Touch Panel Adjustment Screen TV Area Setting Screen < Touch Panel Adjustment > Touch Panel Adjustment Screen TV Area Setting Screen Setting the TV Area (During the KTC-V500P is connected) Select the area for TV broadcast viewing. Selecting the Preset Bands: Touch the [TV 1] or [TV 2] button. Selecting the Reception Area: Each time you touch the [ 2] or [ 3 ] button. Select the channel setting for your country as follows. G1 China PAL-D G2 Burnei Malaysia Singapore Thailand PAL...