Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• H Size Adjust the horizontal size of the screen taking into account the size of the bezel. • V Size Adjust the vertical size of the screen taking into account the size of the bezel. • H-Position Adjust the horizontal position of the screen taking into account the size of the bezel. • V-Position Adjust the vertical position of the screen taking into account the size of the bezel. • Reset Function to initialize and release Tile. All Tile setting are released when selecting. Tile recall and the screen returns to Full screen. • ID Select the location of the Tile by setting an ID. 23 Selecting and Adjusting the Screen Selecting the options • Tile mode -Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4) -4 x 4 available. -Configuration of an integration screen is also available as well as configuration of one by one Display. column column -Tile mode (product 1 ~ 4) : r(2) x c(2) row ID 1 ID 2 ID 3 ID 4 -Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 ID 9 24 Selecting and Adjusting the Screen Selecting the options row column ID 1 ID 2 Use this function to reset the product to the factory default. However, language selectionReset -Tile mode (product 1 ~ 2) : r(2) x c(1) and PC Control selection will not be initialized. Set ID Set ID Logo light PC Control 1 ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. Logo Light Use this function to set the Logo Display Lamp on the front side of the product to On or Off. If you set On, the lamp will automatically be turned on. PC Control You can change the power setting of the PC built in the monitor. On : Turn on/off both the monitor and the built-in PC. Off : Turn on/off the built-in PC only. * How to turn on or off the PC built in the monitor after setting it to Off? (a) Press the power button at the rear side of the monitor and the SOURCE button at once. (b) Or, press the CRT.PWR button (for the B type) or the SLEEP button (for the A type) at the remote control. 25 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto-configure ARC To select the image size of the screen. (1:1 menu are not supported over 1360 X 768 resolution) Auto-configure Auto-configure This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analoge singnal input only. Clock To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This function is suitable for analoge singnal input only. Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This function is suitable for analoge singnal input only. Auto-configure 0 H-Position 0 V-Position To adjust position of the screen. Position This function is suitable for analoge singnal input only. 26 Troubleshooting • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution RGB : 1280 X 1024 @60Hz DVI : 1280 X 1024 @60Hz – It may not be supported depending on the OS or video card type. • Connect the RGB cable, and then change the input source to 'RGB'. And then, press the MENU button to set the PC Control value of the SPECIAL menu to 'On'. Disconnect RGB cable, and turn off the power, and then turn power again. • The signal cable between PC and product is not connected. Check the signal cable. • Press the 'INPUT' menu in the remote Control to check the input signal. • Press the 'INPUT' menu in the remote Control to check the input signal. No image is displayed Is the product power cord connected? Is the power indicator light on? Power is on, power indicator is green but the screen appears extremely dark. Is the power indicator amber? Does the 'Out of range' message appear? Does the 'Power saving mode DVI' message appear? Does the 'Check signal cable' message appear? Did you check the INPUT Key? 27 Note * Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. Troubleshootin...