Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Therefore, Ideal doors do not include a lock. If desired, an easy-to-install, heavy-duty, keyed lock is available. TOOLS NEEDED... All tools may be purchased in Hardware Dept. All steel used in this product is 100% recyclable at the end of its useful life. REID-CH-RESIBR-08 In the interest of better quality and value, we are continually improving and updating our products. Consequently, photos, illustrations and available options may sometimes differ from present models. Ideal Door 1-800-621-3667 Ideal Door is a brand of Clopay Building Products. Clopay Building Products Company, Inc. 2008 A Griffon Company, Inc. Printed in U.S.A. ® © ® 11" 141/2" 61/2" n/a 12" 15 1/2" 10" 7" 12" 14" 91/2" n/a 33/4" 33/4" 6" 6" ITEMS NEEDED BEFORE INSTALLING YOUR GARAGE DOOR Headroom/Sideroom Requirements EXTENSION SPRING TORSION SPRING EZ-SET® SIDEROOM TORSION SPRING 12" TRACK RADIUS 15" TRACK RADIUS LOW HEADROOM DOUBLE TRACK (standard) LOW HEADROOM DOUBLE TRACK (rear mount) FLOOR CEILING 4. BACKROOM 3. HEADROOM 2. LEFT SIDE 2. RIGHT SIDE WIDTH HEIGHT MEASURING FOR YOUR DOOR 1. Measure existing door width and height in feet and inches. This determines the size of door needed. The rough opening should be the same size as the door. Width: ____________________ Height: ____________________ 2. Measure for sideroom: 3 3/4 " is required on each side for installation of the vertical track for standard extension or torsion springs, or EZ-SET Torsion Spring. Sideroom: __________________ 3. Measure area labeled “headroom”—distance between the top of the door opening (“jamb header”) and the ceiling (or first obstruction, ex: light fixture). 11" is required for standard installation of extension springs; 12" on standard torsion springs and EZ-SET Torsion Spring. If you have restricted headroom, special hardware is available. Low headroom hardware is available to reduce requirement to as low as 41/2" (minimum with standard extension spring). EZ-SET Torsion Spring low headroom requirement is 91/2". Note: If door height extends above the opening, the headroom measurement should be adjusted accordingly. Existing headroom: ___________ Headroom needed: ___________ 4. Measure area labeled “backroom”— distance is measured from the garage door opening toward the back wall of the garage. Backroom: __________________ Common garage door widths include 8', 9', 16' and 18'. Common garage door heights include 7' and 8'. See Menards Team Member for additional size availability. ® ® ® Complete Garage Door Selection Steel Panel Doors Carriage House Doors 1 DO-IT-YOURSELF INSTALLATION AS EASY AS 1-2-3 Stack the Sections & Attach Hardware Assemble the Track Wind the Spring WITH EZ-SET® TORSION SPRINGS, IDEAL DOORS ARE EASY TO INSTALL EZ-SET® TORSION SPRING SYSTEM pg. 1 pg. 2 CARRIAGE HOUSE STAMPED STEEL CARRIAGE HOUSE CUSTOM CRAFTED STEEL CARRIAGE HOUSE CUSTOM CRAFTED WOOD Carriage House styles available in three steel construction options. • PREMIUM VALUE STAMPED STEEL– Three-layer constructio...
Эта инструкция также подходит к моделям:Автоматические ворота - Door MX (2.16 mb)
Автоматические ворота - Series 2 Models MF22 (2.16 mb)
Автоматические ворота - Series 2 Models MF23 (2.16 mb)
Автоматические ворота - Series 2 Models MX22 (2.16 mb)