Оценок - 4, средний балл: 4.3 ( )

Производитель: Panasonic Размер: 1.81 mb Название файла: CQDP875EUC.PDF Язык инструкции:

Yokohama, Japan MANUFACTURED Identification Label -- Model No. № De Modèle CQ-DP875EUC J Manufactured by Matsushita Communication Industrial Co., Ltd. Yokohama, Japan Made in Japan H s 12V 4~8H 15A CQ-DP875/850/830EUC Power and Sound Controls Power If the car is not already running, turn the key in the ignition until the accessory indicator lights. Press PWR to switch on the power. Note: When power is switched on for the first time, greeting words display. To cancel this display, press PWR to switch power off then power on again (For CQ-DP875/850EUC). When a CD is inserted with all power connected, the unit power will automatically turn on and CD loading begins and plays. Volume Press “VOL^” or “VOL^" to increase or decrease volume. Volu m e Oto 40 Press “VOL^" or "VOL^" for more than a half second to change numeric levels on the display rapidly. Attenuator • Press ATT. Volume will decrease to about 1/10 of its previous level. • Press ATT again to deactivate when listening at normal volume. | ATT S*HDB (Super High Definition Bass) (For CQ-DP875/850EUC) Especially for rock music, the bass-sound will be more powerful. • Press HDB to be able to listen to high-definition bass. • Press HDB again to return to the normal tone. S-HDB Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level adjuster so that you will not be deafened sudden loud volume. This system operates as follows. When PWR is switched on, the volume level is tow. After that, the volume level gradually returns to its previous level prior to switching off the unit. CQ-DP875/850/830EUC 7 Power and Sound Controls continued Tone Enhancement (Onlyforcq-dps3oeuc) Press LOUD ( © ) to enhance bass and treble tones when listening at low or medium volume. Press LOUD ( 0 ) again to deactivate. LOUD Changing Audio Modes Press SEL to switch the audio mode in the following order. • BASS • • FADER « VOLUME SU8 TREBLE * BALANCE VOLUME • BASS I FADER « • TREBLE BALANCE Bass and Treble • Press SEL to select the BASS (TREBLE) mode. Press “VOL^” or “VOL^” to increase or decrease the bass/treble response. 3R5* 9dJ3ITRE~ 3d3 -12 to 12 -12 to 12 • Press “VOL^" or “VOLv” for more than a half second to change numeric levels on the display rapidly. Balance • Press SEL to select the BALANCE mode. Press “VOL^” or “VOL^” to shift the sound volume to right or left speakers. 3RL f? (5 I3RL CNT or L 1 to 15 Balance Center • Press “VOL/v” or “VOL^” for more than a half second to change numeric levels on the display rapidly. Fader • Press SEL to select the FADER mode. Press “VOL^” or “VOLv” to shift the sound volume to the front or rear speakers. FR3 F ¡5 IFflJ CNT or R 1 to 15 Balance Center • Press “VOL^” or “VOL'/” for more than a half second to change numeric levels on the display rapidly. Note: When a control mode (BAS/TRE/BAL/FAD) is selected but no operation is made within 5 seconds{2 seconds at volume mode), the display will return to the normal operation (Radio, CD, etc) mode. In such a case, press SEL again to select the control mode. CQ-DP875/850/830EUC Sub-woofer Volume (omyforcq-dp875euc) • Press SEL to select the Sub-woofer Volume mode. • Press “VOL^” or “VOLV to increase or decrease the Sub-woofer volume level. 5L/3 Ml I T r I IÜ I L (MUTE to 5) JS I ITH CHANQER CONTftOL \ MMOIf VjzS' b/7*— Selecting Auxiliary Source • Press AUX to select AUX Input mode. Guv/ Mu /\ • Connect the auxiliary equipment (an optional DCC player deck or any other appropriate equipment) to the AUX Jack. Canceling AUX Input mode Press AUX or MODE again while the AUX mode is operated, the mode will return to the previous mode. Or insert a CD and the mode will change to CD mode. Note: The AUX mode enables setting of VOL,BAS,and FAD.independently of other modes. (For CQ-DP875/DP850EUC) 1 —f- oqTI C 1—A — A-MIN 1/2" LONG (12mm) B-MAX 2/5" DIA. (10mm) C-MIN 1/8" DIA. (3.5mm) Caution: In order to insert the plug into the “AUX” Jack properly, make sure to use the correct size of the stereo plug shown on the left. CQ-DP875/850/830EUC 9 Radio Basics To change Tuner Mode Tuner mode is selected if the MODE button is pressed while in either CD Player or CD Changer Control modes (Only for CQ-DP875EUC). You can select FM or AM directly. Selecting a Band • Press BAND to select the bands in the following order. FM2 —► FM3 FM1- ‘AM I • Press FM to select the bands in the following order. FM1 -► FM2 -► FM3 t_'_i • Press AM to select the bands. “STEREO” indicator lights if the station is broadcasting in stereo. Manual Tuning Press “TUNE^” or “vTUNE" to move to a higher or lower frequency. Seek Tuning Press and hold “TUNE^” or “WUNE” for more than a half second, then release. The radio aut...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: